
【国外标准】 Standard Test Method for Trace Quantities of Carbonyl Compounds with 2,4-Dinitrophenylhydrazine
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
4.1 This test method is applicable to the determination of trace amounts of aldehydes and ketones in aqueous solutions and a wide variety of organic solvents.1.1 This test method covers the determination of total carbonyl in the range from 0.5 μg to 50 μg calculated as CO.1.2 This test method is intended to be general and does not include steps for sample preparation.1.3 Acetals that hydrolyze under the conditions of the test are also determined.1.4 Carbonyl derivatives such as acetals and imines that are easily hydrolyzed may be determined by an alternative procedure.1.5 The developed color is not stable and must be measured within a specified period.NOTE 1: Other test methods for the determination of traces of carbonyl compounds are given in Test Methods D1089, D1612, D2119, and D2191.1.6 Review the current appropriate Safety Data Sheets (SDS) for detailed information concerning toxicity, first aid procedures, and safety precautions.1.7 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.8 In determining the conformance of the test results using this method to applicable specifications, results shall be rounded off in accordance with the rounding-off method of Practice E29.1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific hazards statements are given in Section 7 and Section 8.1.10 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM E411-24
标准名称:
Standard Test Method for Trace Quantities of Carbonyl Compounds with 2,4-Dinitrophenylhydrazine
英文名称:
Standard Test Method for Trace Quantities of Carbonyl Compounds with 2,4-Dinitrophenylhydrazine标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- AS 5013.24.1-2009 Food microbiology Microbiology of food and animal feeding stuffs - Horizontal method for the detection and enumeration of Listeria monocytogenes - Detection method (ISO 11290-1:1996, MOD)
- AS/NZS 2341.24:1996 (R2013) Methods of testing bitumen and related roadmaking products Calculation of non-aqueous volatiles content (by difference)
- AS/NZS 3200.2.24:1999 Medical electrical equipment Particular requirements for safety - Infusion pumps and controllers
- AS/NZS 3350.2.24:2001/Amdt 1:2007 Safety of household and similar electrical appliances Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers (IEC 60335-2-24:2000, MOD)
- AS/NZS 60335.2.24:2003/Amdt 1:2005 Household and similar electrical appliances - Safety Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers
- AS/NZS CISPR 24:2002/Amdt 1:2009 Information technology equipment - Immunity characteristics - Limit and methods of measurement
- ASTM 51026-23 Standard Practice for Using the Fricke Dosimetry System
- ASTM 52303-24 Standard Guide for Absorbed-Dose Mapping in Radiation Processing Facilities
- ASTM A1-00(2018) Standard Specification for Carbon Steel Tee Rails
- ASTM A1000/A1000M-17(2023) Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality
- ASTM A1001-18 Standard Specification for High-Strength Steel Castings in Heavy Sections
- ASTM A1002-16(2020) Standard Specification for Castings, Nickel-Aluminum Ordered Alloy
- ASTM A1004/A1004M-99(2018) Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members
- ASTM A1009-18 Standard Specification for Soft Magnetic MnZn Ferrite Core Materials for Transformer and Inductor Applications
- ASTM A101-04(2019) Standard Specification for Ferrochromium