
【国外标准】 Standard Practice for Physical Description Screening Analysis in Waste
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
5.1 This practice is intended for use by those in the waste management industries to aid in describing the physical characteristics of waste.5.2 This practice has two uses. One is to visually screen wastes being received at the laboratory to identify discrepancies between the waste, manifest, and historical descriptions. The other use is to visually examine soil and water samples while they are being collected. This information, along with professional judgment during sample collection, can be used to increase the knowledge of the site contamination by increasing or reducing the number of samples collected based on visible indication of contamination or lack of visible indication of contamination. For example, if a soil or groundwater sample is collected “up gradient” of the area of known or suspected contamination to obtain site background concentrations, and the sample appears contaminated, the up-gradient area can be relocated during that sampling event. Visual observation could also show that the sampling parameters need to be increased or decreased. This may reduce or eliminate the need for additional sampling trips to the field.1.1 This practice is used to identify wastes by describing certain physical properties. It has been developed as a rapid but effective means for visually screening wastes when received in the laboratory or during collection at the sampling site.1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific hazard and warning information is given in 8.1.6.1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM D4979-19
标准名称:
Standard Practice for Physical Description Screening Analysis in Waste
英文名称:
Standard Practice for Physical Description Screening Analysis in Waste标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM D1025-23 Standard Test Method for Nonvolatile Residue of Polymerization-Grade Butadiene
- ASTM D1037-12(2020) Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials
- ASTM D1039-16(2022) Standard Test Methods for Glass-Bonded Mica Used as Electrical Insulation
- ASTM D1044-19 Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion by the Taber Abraser
- ASTM D1045-19 Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics
- ASTM D1048-22 Standard Specification for Rubber Insulating Blankets
- ASTM D1049-98(2022) Standard Specification for Rubber Insulating Covers
- ASTM D1050-05(2022) Standard Specification for Rubber Insulating Line Hose
- ASTM D1053-92a(2018) Standard Test Methods for Rubber Property—Stiffening at Low Temperatures: Flexible Polymers and Coated Fabrics
- ASTM D1056-20 Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber
- ASTM D1059-17(2022) Standard Test Method for Yarn Number Based on Short-Length Specimens
- ASTM D1062-08(2023) Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
- ASTM D1065-18(2022) Standard Test Method for Unsaponifiable Matter in Pine Chemicals, Including Rosin, Tall Oil, and Related Products
- ASTM D1067-16 Standard Test Methods for Acidity or Alkalinity of Water
- ASTM D1073-16(2022) Standard Specification for Fine Aggregate for Asphalt Paving Mixtures