
【国外标准】 Numerical values - Rounding and interpretation of limiting values
本网站 发布时间:
2021-03-22
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
暂无
标准号:
AS 2706-1984
标准名称:
Numerical values - Rounding and interpretation of limiting values
英文名称:
Numerical values - Rounding and interpretation of limiting values标准状态:
现行-
发布日期:
1984-04-06 -
实施日期:
出版语种:
- 推荐标准
- INCITS 115-1984 (S2017) Unformatted 80 Megabyte Trident Pack for Use at 370 TPI and 6000 BPI - Physical, Mechanical and Magnetic Characteristics
- INCITS 117-1984 (S2017) Printable/Image Areas for Text and Facsimile Communication Equipment
- INCITS 119-1984 (S2017) Contact Start/Stop Storage Disk, 158361 Flux Transitions per Track, 8.268 Inch (210 mm) Outer Diameter and 3.937 Inch (100 mm) Inner Diameter
- INCITS 120-1984 (S2017) Contact Start/Stop Storage Disk, 95840 Flux Transitions per Track, 7.874 Inch (200 mm) Outer Diameter and 2.500 Inch (63.5 mm) Inner Diameter
- INCITS 121-1984 (S2021) Two-Sided Unformatted 8-Inch (200 MM) Double Density Flexible Disk Cartridge (For 13262 FTPR Two-headed Application) (Combined with Project 287)
- INCITS 121-1984[S2011] Two-Sided Unformatted 8-Inch (200-mm) Double Density Flexible Disk Cartridge, General, Physical, and Magnetic Requirements (for 13,262 FTPR Two-Headed Application) (formerly ANSI X3.121-1984 (R2001))
- INCITS/ISO 4232-3-1984 Office Machines - Minimum Information to be Included in Specification Sheets - Part 3: Postal Franking Machines (formerly ANSI/ISO 4232-3-1984)
- INCITS/ISO 5654-1:1984 (S2020) Information processing - Data interchange on 200 mm (8 in) flexible disk cartridges using two-frequency recording at 13 262 ftprad, 1,9 tpmm (48 tpi), on one side - Part 1: Dimensional, physical and magnetic characteristics
- INCITS/ISO/IEC 5138-9:1984 (S2019) Information technology - Office machines - Part 9: Typewriters
- AS 4024.1601-2006 Safety of machinery Design of controls, interlocks and guarding - Guards - General requirements for the design and construction of fixed and movable guards
- AS 4024.1702-2006 Safety of machinery Human body measurements - Principles for determining the dimensions required for openings for whole body access into machinery
- AS 4024.1703-2006 Safety of machinery Principles for determining the dimensions required for access openings
- AS 4024.1801-2006 Safety of machinery Safety distances to prevent danger zones being reached by the upper limbs
- AS 4024.1902-2006 Safety of machinery Displays, controls, actuators and signals - Ergonomic requirements for the design of displays and control actuators - Displays
- AS 4024.1903-2006 Safety of machinery Displays, controls, actuators and signals - Ergonomic requirements for the design of displays and control actuators - Control actuators