
【国外标准】 Standard Test Methods for Gravimetric Determination of Total Solvent Extractable Content (TSEC) of Solid Waste Samples (Withdrawn 2014)
本网站 发布时间:
2024-02-28
- ASTM D5368-13
- Withdrawn, No replacement
- 定价: 0元 / 折扣价: 0 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
5.1 The TSEC provides a quantitative measure of the total solvent extractable organic content of the solid waste in question. Based upon the TSEC, the extract may be analyzed or further processed (that is, further cleanup or solvent concentration) in preparation for analysis. Thus, the TSEC provides a quantitative measure for optimizing the extractable organic concentration prior to chemical analysis.5.2 The TSEC of soil or waste material may be used as a quantitative measure for the screening and selection of samples for chemical analysis.5.3 The TSEC may be useful as a simple and relatively inexpensive quantitative indicator of changes occurring in the total extractable organic content of soil or waste materials.5.4 The detection limit of the TSEC depends upon the specific procedures employed. Typical detection limits in solvent extracts (that is, without solvent pre-concentration) for Method A are more than 1000 μg/g. For Method B typical detection limits are 20 to 100 μg/g in the solvent extract. For Method C the typical detection limits are 3 to 20 μg/g for solutes in the solvent extract.5.5 The sensitivity of the methods can be adjusted by varying the volume of solvent extract prior to gravimetric residue determination.1.1 These test methods describe standard procedures for gravimetrically determining the total nonvolatile and semi-volatile organic content of solvent extracts from soils or solid wastes. The following methods are included: Section Method A—Micro-Determination of TSEC 11-13 Method B—Evaporating Dish Procedure 14-16 Method C—Boiling Flask Procedure 17-191.2 These methods are used after a solvent extract is obtained from a soil or solid waste. For these methods to be applicable, the extraction solvent must have a boiling point less than that of water at ambient pressure.1.3 The total solvent extractable content (TSEC) of a soil, sediment, sludge, or solid waste depends upon the solvent and method used for the extraction procedure.
标准号:
ASTM D5368-13
标准名称:
Standard Test Methods for Gravimetric Determination of Total Solvent Extractable Content (TSEC) of Solid Waste Samples (Withdrawn 2014)
英文名称:
Standard Test Methods for Gravimetric Determination of Total Solvent Extractable Content (TSEC) of Solid Waste Samples (Withdrawn 2014)标准状态:
Withdrawn, No replacement-
发布日期:
-
实施日期:
出版语种:
- 其它标准
- 上一篇: ASTM D5367-16(2021) Standard Practice for Evaluating Coatings Applied Over Surfaces Treated With Inhibitors Used to Prevent Flash Rusting of Steel When Water or Water/Abrasive Blasted
- 下一篇: ASTM D5369-93(2008)e1 Standard Practice for Extraction of Solid Waste Samples for Chemical Analysis Using Soxhlet Extraction (Withdrawn 2016)
- 推荐标准
- AS/NZS 2891.13.1:2013 Methods of sampling and testing asphalt Determination of the resilient modulus of asphalt - Indirect tensile method
- AS/NZS 3200.2.13:2005 Medical electrical equipment Particular requirements for safety - Anaesthetic systems
- AS/NZS 3350.2.13:1997/Amdt 3:2001 Safety of household and similar electrical appliances - Particular requirements - Deep fat fryers, frying pans and similar appliances
- AS/NZS 3350.2.13:2001/Amdt 1:2007 Safety of household and similar electrical appliances Particular requirements for deep fat fryers, frying pans and similar appliances (IEC 60335-2-13:1993, MOD)
- AS/NZS 3750.13:1997 (R2013) Paints for steel structures Epoxy primer (two pack)
- AS/NZS 3905.13:1998 Quality system guidelines Guide to AS/NZS ISO 9001:1994 for the food processing industry
- AS/NZS 4276.13:2008 Water microbiology Pseudomonas aeruginosa - Membrane filtration method
- AS/NZS 4456.13:1997 Masonry units and segmental pavers - Methods of test Determining pitting due to lime particles
- AS/NZS 4695.2.13:1996 Fire hazard testing electrotechnical products Test methods - Glow-wire ignitability test on materials
- AS/NZS 60335.2.13:2010 Household and similar electrical appliances - Safety Particular requirements for deep fat fryers, frying pans and similar appliances
- AS/NZS 60745.2.13:2010/Amdt 1:2011 Hand-held motor-operated electric Tools - Safety Particular requirements for chain saws
- AS/NZS 61000.4.13:2006 Electromagnetic compatibility (EMC) Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
- AS/NZS CISPR 13:2003 Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement
- ASTM 51026-23 Standard Practice for Using the Fricke Dosimetry System
- ASTM 52303-24 Standard Guide for Absorbed-Dose Mapping in Radiation Processing Facilities