购物车
400-168-0010
【国际标准】 Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw
本网站 发布时间：
2024-05-11
开通会员免费在线看70000余条国内标准，赠送文本下载次数，单本最低仅合13.3元！还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权！
查看详情>>
标准简介适用范围：
暂无
标准号：
ISO 5415:1977 EN
标准名称：
Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw
英文名称：
Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw标准状态：
废止-
发布日期：
1977-03-01 -
实施日期：
出版语种：
EN
- 推荐标准
- ISO 10649-2:2013 EN 4cdcc386 Cutter arbors with parallel key and tenon drive — Part 2: Dimensions and designation of tool holders with taper interface with flange contact surface
- ISO 10649-4:2013 EN 8f6123e1 Cutter arbors with parallel key and tenon drive — Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changer
- ISO 10649-5:2012 EN b2620100 Cutter arbors with parallel key and tenon drive — Part 5: Dimensions and designation of tool holders with polygonal taper interface with flange contact surface
- ISO 10889-1:2004 EN 805fada9 Tool holders with cylindrical shank — Part 1: Cylindrical shank, location bore — Technical delivery conditions
- ISO 10889-2:2016 EN 6efd933c Tool holders with cylindrical shank — Part 2: Type A, shanks for tool holders of special designs
- ISO 10889-5:2016 EN aeddfd3d Tool holders with cylindrical shank — Part 5: Type D with more than one rectangular seat
- ISO 10889-6:2016 EN ac79a585 Tool holders with cylindrical shank — Part 6: Type E with cylindrical seat
- ISO 10889-8:1997 EN d64622e3 Tool holders with cylindrical shank — Part 8: Type Z, accessories
- ISO 10897:2016 EN 432f283e Collets for tool holders with taper ratio 1:10 — Collets, holders, nuts
- ISO 12164-4:2023 EN d727a877 Hollow taper interface with flange contact surface — Part 4: Receivers of types T and U for hollow taper shanks of types T, TA and U
- ISO 12164-5:2023 EN ee821d42 Hollow taper interface with flange contact surface — Part 5: Shanks of types AS, CS and ES
- ISO 15488:2003 EN d79485e1 Collets with 8 degree setting angle for tool shanks — Collets, nuts and fitting dimensions
- ISO 22402-1:2021 EN f9fa35ea Medium-transfer units for tool interfaces — Part 1: Transfer units for hollow taper shanks in accordance with the ISO 12164 series
- ISO 22402-2:2022 EN 77089874 Medium-transfer units for tool interfaces — Part 2: Transfer units for polygonal taper interfaces in accordance with the ISO 26623 series
- ISO 238:2016 EN 98f5d638 Reduction sleeves and extension sockets for tools with Morse taper shanks
