
【国外标准】 Standard Test Method for Determining Chloride Used in Calculating Pentachlorophenol in Solutions or Wood (Lime Ignition Method) (Withdrawn 2006)
本网站 发布时间:
2024-02-28
- ASTM D2085-89(2002)
- Withdrawn, No replacement
- 定价: 0元 / 折扣价: 0 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
1.1 These procedures cover the chemical analysis by the lime ignition method of treating solutions containing pentachlorophenol and of wood treated with pentachlorophenol. The method is suitable for the determination of up to 0.05 g of pentachlorophenol in treating solutions (Section ), up to 0.05 g of pentachlorophenol in wood volumes up to 0.25 in.3 (Section 11), and up to 0.25 g of pentachlorophenol in wood volumes up to 2.0 in.3 (Section ).1.2 This test method is not applicable to samples containing halogens other than chlorine unless appropriate correction can be made. Total halogen (excluding fluorine) is calculated as its pentachlorophenol equivalent of chloride.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
标准号:
ASTM D2085-89(2002)
标准名称:
Standard Test Method for Determining Chloride Used in Calculating Pentachlorophenol in Solutions or Wood (Lime Ignition Method) (Withdrawn 2006)
英文名称:
Standard Test Method for Determining Chloride Used in Calculating Pentachlorophenol in Solutions or Wood (Lime Ignition Method) (Withdrawn 2006)标准状态:
Withdrawn, No replacement-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- AS/NZS 1429.1:2000/Amdt 1:2002 Electric cables - Polymeric insulated For working voltages 1.9/3.3 (3.6) kV up to and including 19/33 (36) kV
- AS/NZS 14644.2:2002 Cleanrooms and associated controlled environments Specifications for testing and monitoring to prove continued compliance with ISO 14644-1 (ISO 14644-2:2000, MOD)
- AS/NZS 1554.3:2002 Structural steel welding Welding of reinforcing steel
- AS/NZS 1554.3:2002/Amdt 1:2003 Structural steel welding Welding of reinforcing steel
- AS/NZS 1604.4:2002 Specification for preservative treatment Laminated veneer lumber (LVL)
- AS/NZS 1735.18:2002 Lifts, escalators and moving walks Passenger lifts for private residence - Automatically controlled
- AS/NZS 1766.2.12:2002 Food microbiology Examination for specific organisms - Escherichia coli in bivalve molluscs - Rapid method
- AS/NZS 2081.1:2002 Electrical equipment for coal and shale mines - Electrical protection devices General requirements
- AS/NZS 2081.2:2002/Amdt 1:2004 Electrical equipment for coal and shale mines - Electrical protection devices Earth-continuity monitoring devices
- AS/NZS 2081.3:2002 Electrical equipment for coal and shale mines - Electrical protection devices Earth-leakage protection systems for use on earth-fault current limited systems (IT systems)
- AS/NZS 2144:2002 Traffic signal lanterns
- AS/NZS 2211.3:2002 Safety of laser products Guidance for laser displays and shows
- AS/NZS 2243.3:2002/Amdt 1:2003 Safety in laboratories Microbiological aspects and containment facilities
- AS/NZS 2299.2:2002 Occupational diving operations Scientific diving
- AS/NZS 2341.0:2002 Methods of testing bitumen and related roadmaking products General introduction and list of standards