
【国外标准】 Standard Test Method for Determining Acid-Extractable Content in Activated Carbon by Ashing
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
4.1 The quantitative determination of acid-extractable content is useful in evaluating activated carbon samples that contain acid-soluble impurities. These acid-soluble impurities can affect applications of activated carbon.4.2 Limitations of Method—Hydrochloric acid is used in this test method as the extracting acid. All elements or compounds present in the activated carbon sample, which can be acid extracted, are assumed to form water-soluble chloride salts. Hydrochloric acid may not solubilize all impurities of activated carbon.1.1 This test method is to be used for determination of the acid-extractable content of a sample of activated carbon. This test method presupposes the existence of substances other than carbon to be present with activated carbon but does not purport to address or identify those substances which may be present. This test method should be applicable to any form in which activated carbon may exist and requires the performance of Test Method D2866.1.2 This test method requires the use of concentrated hydrochloric acid, which should be used in an appropriate and safe manner, with eye protection, skin protection, and handling carried out in a properly operating fume hood. The proper use of a muffle furnace is addressed in Test Method D2866.1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM D6385-22
标准名称:
Standard Test Method for Determining Acid-Extractable Content in Activated Carbon by Ashing
英文名称:
Standard Test Method for Determining Acid-Extractable Content in Activated Carbon by Ashing标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM B1-13(2018) Standard Specification for Hard-Drawn Copper Wire
- ASTM B100-20 Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use
- ASTM B1002-16(2020) Standard Specification for Refined Indium
- ASTM B1003-16(2023) Standard Specification for Seamless Copper Tube for Linesets
- ASTM B1004-16(2022) Standard Practice for Contact Performance Classification of Electrical Connection Systems
- ASTM B1005-17(2023) Standard Specification for Copper-Clad Aluminum Bar for Electrical Purposes (Bus Bar)
- ASTM B1008-18 Standard Test Method for Stress-Strain Testing for Overhead Electrical Conductors
- ASTM B1010/B1010M-19 Standard Specification for Copper-Clad Steel Electrical Conductor for Tracer Wire Applications
- ASTM B1011/B1011M-22 Standard Specification for Cobalt Alloy Spring Wire
- ASTM B1013-22 Standard Specification for High Fluidity (HF) Zinc-Aluminum Alloy Thin Wall Die Castings
- ASTM B1014-20 Standard Specification for Welded Copper and Copper Alloy Condenser and Heat Exchanger Tubes with a Textured Surface(s)
- ASTM B1019-21 Standard Test Method for Determination of Surface Oxides on Copper Rod(for Electrical Purposes)
- ASTM B1020/B1020M-22 Standard Specification for Seamless Nickel Alloy Mechanical Tubing and Hollow Bar
- ASTM B1021-21 Standard Test Method for Peel Resistance of Metal Sheets Joined by High Strength Bonds
- ASTM B1022-22 Standard Specification for Zinc-Aluminum-Magnesium Alloys in Ingot Form for Coating Steel Sheet by the Hot-Dip Process