
【国外标准】 Standard Test Method for Instrumental Measurement of Distinctness-of-Image (DOI) Gloss of Coated Surfaces
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
4.1 An important aspect of the appearance of glossy coating surfaces is the distinctness (clarity) of images reflected by them. The values obtained in this measuring procedure correlate well with visual ratings for DOI (image clarity).4.2 Although Test Methods D523 and D4039 are useful in characterizing some aspects of glossy appearance, they do not provide satisfactory ratings for DOI (image clarity).4.3 The measurement conditions given conform to the conditions specified in Test Methods E430.4.4 The measurement conditions given in this test method conform to the conditions specified in ISO 10216.4.5 The scale values obtained with the measuring procedures of this test method range from 0 to 100 with a value of 100 representing perfect DOI (image clarity).4.6 The DOI (image clarity) scale value does not, of itself, indicate any specific cause for reduction in reflected image sharpness. Surface irregularities such as haze, orange peel, and wrinkle, when present, may be cited as causes for reduction of image sharpness.1.1 These test methods describe the measurement of the distinctness-of-image (DOI) gloss of coating surfaces using electro-optical measuring techniques.1.2 The coatings assessed shall be applied to planar rigid surfaces.1.3 Test Method—The light through a small slit is projected on the specimen surface and its reflected image intensity is measured through a sliding combed shutter to provide a value of image clarity.1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM D5767-18(2023)
标准名称:
Standard Test Method for Instrumental Measurement of Distinctness-of-Image (DOI) Gloss of Coated Surfaces
英文名称:
Standard Test Method for Instrumental Measurement of Distinctness-of-Image (DOI) Gloss of Coated Surfaces标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- INCITS 305-1998 (S2023) Information technology - SCSI Enclosure Services (SES)
- INCITS 305-1998/AM 1-2000 (S2023) Information technology - SCSI Enclosure Services (SES) - Amendment 1
- INCITS 330-2000/AM 1-2003 (S2023) Information technology - Reduced Block Commands (RBC) - Amendment 1
- INCITS 382-2004 (S2023) Information technology - SCSI Media Changer Command Set, Version 2 (SMC-2)
- INCITS 423.2-2008 (R2023) Information technology - Conformance Testing Methodology Standard for Biometric Data Interchange Format Standards - Part 2: Conformance Testing Methodology for INCITS 378-2004, Finger Minutiae Format for Data Interchange
- INCITS 446-2008 (R2023) Information Technology - Identifying Attributes for Named Physical and Cultural Geographic Features (Except Roads and Highways) of the United States, Territories, Outlying Areas, and Freely Associated Areas, and the Waters of the Same to the Limit of the Twelve-Mile Statutory Zone
- INCITS 496-2012/AM2-2023 Information Technology - Fibre Channel - Security Protocols-2/Amendment 2 (FC-SP-2/AM2)
- INCITS 504-2-2013 (R2023) Information technology - Generic Identity Command Set (GICS) - Part 2: Card Administrative Command Set
- INCITS 505-2013 (R2023) Information technology - SAS Protocol Layer - 2 (SPL-2)
- INCITS 528-2013 (S2023) Information Technology - Common Building Blocks Specification
- INCITS 540-2018 (R2023) Information technology - Fibre Channel - Non-Volatile Memory Express (FC-NVMe)
- INCITS 554-2023 Information Technology - SAS Protocol Layer - 5 (SPL-5)
- INCITS 560-2023 Information Technology - Fibre Channel - Physical Interface-8 (FC-PI-8)
- INCITS 563-2023 Information Technology - Fibre Channel Protocol for SCSI Fifth Version (FCP-5)
- INCITS/ISO 19107:2019 (2023) Geographic information - Spatial schema