
【国外标准】 Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
4.1 This test method provides a means of evaluating traveled surface roughness. The measured values represent vehicular response to traveled surface roughness obtained with the equipment and procedures stated herein and do not necessarily agree or correlate directly with those obtained by other methods.31.1 This test method covers the determination of vehicular response to traveled surface roughness.1.2 This test method utilizes an apparatus that measures the relative motion of a sprung mass system in response to traveled surface roughness where the mass is supported by automotive-type suspension and tires.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Section 6.1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM E1082-90(2024)
标准名称:
Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
英文名称:
Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM D4882-17 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Twisted-Coil Test
- ASTM D4883-18 Standard Test Method for Density of Polyethylene by the Ultrasound Technique
- ASTM D4886-23 Standard Test Method for Abrasion Resistance of Geotextiles (Sandpaper/Sliding Block Method)
- ASTM D4887/D4887M-11(2021)e1 Standard Practice for Preparation of Viscosity Blends for Hot Recycled Asphalt Materials
- ASTM D4889-21 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates
- ASTM D4891-13(2018) Standard Test Method for Heating Value of Gases in Natural Gas and Flare Gases Range by Stoichiometric Combustion
- ASTM D4894-19 Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials
- ASTM D4895-18(2023) Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion
- ASTM D4897/D4897M-16(2023) Standard Specification for Asphalt-Coated Glass-Fiber Venting Base Sheet Used in Roofing
- ASTM D4898-23 Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis
- ASTM D4899-99(2020) Standard Practice for Analysis of Vegetable Tanning Materials—General
- ASTM D4902-99(2020) Standard Test Method for Evaporation and Drying of Analytical Solutions
- ASTM D4903-99(2020) Standard Test Method for Total Solids and Water in Vegetable Tanning Material Extracts
- ASTM D4906-95(2023) Standard Test Method for Total Solids and Ash Content in Leather Finishing Materials
- ASTM D4914/D4914M-16 Standard Test Methods for Density of Soil and Rock in Place by the Sand Replacement Method in a Test Pit