您的位置：
快3网下载安装到手机 >>
全部标准分类 >>
国外标准 >>
IEEE >>
IEEE 301-1988 IEEE Standard Test Procedures for Amplifiers and Preamplifiers used with Detectors of Ionizing Radiation

【国外标准】 IEEE Standard Test Procedures for Amplifiers and Preamplifiers used with Detectors of Ionizing Radiation

本网站发布时间： 2025-04-28

IEEE 301-1988
定价： 191元 / 折扣价： 163 元
在线阅读

开通会员免费在线看70000余条国内标准，赠送文本下载次数，单本最低仅合13.3元！还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权！查看详情>>

标准简介

适用范围：

These test procedures cover amplifier and preamplifier systems with linear pulse-shaping networks for use with semiconductor, scintillation, and proportional detectors in the spectroscopy of ionizing radiation. The object is to provide a common language and methodology for users and manufacturers of pulse-amplifier systems. This standard supersedes IEEE Std 301-1976, IEEE Standard Test Procedures for Amplifiers and Preamplifiers for Semiconductor Radiation Detectors for Ionizing Radiation. Test procedures for associated detectors are described in ANSI/IEEE Std 300-1988 and ANSI/IEEE Std 325-1986. IEEE Std 194-1977 is a companion document for pulse-shape terminology. Not all of the tests described herein are mandatory, but those that are performed to determine preamplifier and amplifier specifications shall conform to this standard. The emphasis on the methods of measurement is to enhance sensitivity and improve accuracy by working around the limitations of the test instruments, particularly oscilloscopes that have only a visual display for readout. A null technique is used where possible, thereby reducing basic errors to the inaccuracy of a pair of precision resistors. When use of a bridge is inappropriate, such as in measurements of pulse height with an oscilloscope, the pulse is made to occupy a fixed amplitude and vertical position on the face of the cathode-ray tube (CRT). Some measurements require test instruments or fixtures not commercially available at this writing; circuit diagrams for their construction are given in the Appendix. It is not acceptable to make use of a standard nuclear instrument module to test the performance of an amplifier unless the errors introduced by that module can be corrected for or shown to be less than the error caused by the amplifier. Examples are the use of a crossover-pickoff module to measure crossover walk in a bipolar amplifier, and an MCA to measure nonlinearity and noise.

基本信息

标准号：
IEEE 301-1988
标准名称：
IEEE Standard Test Procedures for Amplifiers and Preamplifiers used with Detectors of Ionizing Radiation
英文名称：
标准状态：
发布日期：
实施日期：
出版语种：

标准分类号

标准ICS号：
中标分类号：

关联标准

替代以下标准：
被以下标准替代：
引用标准：
采用标准：

出版信息

页数：
字数：
开本：

其他信息

起草人：
起草单位：
归口单位：
提出部门：
发布部门：

其它标准

推荐标准