
【国外标准】 Standard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
5.1 The NVR obtained by this test method is that amount which is available for release by the gloves onto handled surfaces.5.2 Evaporation of solvent at the stated temperature is to quantify the NVR that can be expected to exist at room temperature, since the slight difference between room temperature and the test temperature is not likely to result in significant variances.5.3 This method may be more aggressive than necessary to determine the suitability of cleanroom gloves that are restricted to dry operations only.5.4 Various other methods exist for determining NVR, for example Practice G120 and IEST-RP-CC005. This test is not intended to replace test methods used for other purposes.1.1 This test method covers the determination of solvent extractable nonvolatile residue (NVR) from gloves used in cleanrooms where spacecraft are assembled, cleaned, or tested.1.2 The NVR of interest is that which can be extracted from gloves using a specified solvent that has been selected for its extracting qualities, or because it is representative of solvents used in the particular facility. Alternative solvents may be used, but since their use may result in different values being generated, they must be identified in the procedure data sheet.1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM E1731-11(2018)
标准名称:
Standard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves
英文名称:
Standard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- AS/NZS 2891.11:2014 Methods of sampling and testing asphalt Degree of particle coating
- AS/NZS 3200.2.11:1999 Medical electrical equipment Particular requirements for safety - Gamma beam therapy equipment
- AS/NZS 3350.2.11:1995/Amdt 1:1998 Approval and test specification - Safety of household and similar electrical appliances - Particular requirements - Tumbler dryers
- AS/NZS 3350.2.11:1999/Amdt 2:2001 Safety of household and similar electrical appliances - Particular requirements - Tumble dryers
- AS/NZS 3350.2.11:2001/Amdt 1:2007 Safety of household and similar electrical appliances Particular requirements for tumble dryers (IEC 60335-2-11:2000, MOD)
- AS/NZS 4456.11:1997 Masonry units and segmental pavers - Methods of test Determining coefficients of expansion
- AS/NZS 4456.11:2003/Amdt 1:2004 Masonry units, segmental pavers and flags - Methods of test Determining coefficients of expansion
- AS/NZS 60079.11:2000/Amdt 1:2001 Electrical apparatus for explosive gas atmospheres Intrinsic safety 'i'
- AS/NZS 60335.2.11:2002/Amdt 1:2004 Household and similar electrical appliances - Safety - Particular requirements for tumble dryers (IEC 60335-2-11 Ed 6, MOD)
- AS/NZS 60695.11.20:2001/Amdt 1:2004 Fire hazard testing Test flames - 500 W flame test methods
- AS/NZS 60695.11.3:2001 Fire hazard testing Test flames - 500 W flames - Apparatus and confirmational test methods (IEC 60695-11-3:2000, IDT)
- AS/NZS 60695.2.11:2001/Amdt 1:2001 Fire hazard testing Glowing/hot wire based test methods - Glow-wire flammability test method for end-products
- AS/NZS 60745.2.11:2003 Hand-held motor-operated electric tools - Safety - Particular requirements for reciprocating saws
- AS/NZS 60745.2.11:2009 Hand-held motor-operated electric tools - Safety Particular requirements for reciprocating saws (jig and sabre saws)
- ASC X9 TR 48-2018 Card-Not-Present (CNP) Fraud Mitigation in the United States: Strategies for Preventing, Detecting, and Responding to a Growing Threat