【国外标准】 Standard Specification for Elastomeric Water Bottles

This specification covers requirements for molded, non-fabric reinforced, elastomeric water bottles with closure and screw stopper, generally used with hot or cold water in personal hygiene and health care. Bottles to be used shall be manufactured from an elastomeric compound that has the following physical properties determined: tensile strength, ultimate elongation, resistance to heating at a certain temperature and resistance to water also at a certain degree. Aside from that, the stopper of the bottles shall also be manufactured from a noncorrosive metal or polymeric material. The bottle and stopper shall not be toxic, sensitizing, locally irritating, or otherwise harmful under normal conditions of use. The construction shall consist of an integral body and closure designed for use with hot or cold water.1.1 This specification covers requirements for molded, non-fabric reinforced, elastomeric water bottles with closure and screw stopper, generally used with hot or cold water in personal hygiene and health care.1.2 The safe and proper use of elastomeric water bottles is beyond the scope of this specification except for the user instructions in 9.2.1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.