
【国外标准】 Standard Guide for Emergency Operations Center (EOC) Development (Withdrawn 2019)
本网站 发布时间:
2024-02-28
- ASTM E2668-10
- Withdrawn, No replacement
- 定价: 0元 / 折扣价: 0 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
A critical part of developing an emergency management capability is establishing and preparing to operate an EOC. A well-designed EOC, coupled with well-trained personnel, will enable the coordination of response and recovery activities. An EOC can serve as an effective and efficient facility for coordinating all emergency response efforts and will optimize emergency communications and information management. This standard guide is intended to provide the emergency management community with practical concepts and approaches to develop an effective EOC.1.1 This guide provides general guidelines for the development of an emergency operations center (EOC).1.2 An EOC may be developed by either the public or private sector in response to the demonstrated or predicted need for a designated facility at which those involved in emergency/disaster management and the coordination of response and recovery efforts work.1.3 This guide may also serve as a foundation for larger facilities such as a regional operations center (ROC) or state operations center (SOC) with a broader area of responsibility and more extensive needs to communicate and coordinate with others.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
标准号:
ASTM E2668-10
标准名称:
Standard Guide for Emergency Operations Center (EOC) Development (Withdrawn 2019)
英文名称:
Standard Guide for Emergency Operations Center (EOC) Development (Withdrawn 2019)标准状态:
Withdrawn, No replacement-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- AS/NZS 3350.2.10:1996/Amdt 2:2001 Safety of household and similar electrical appliances Particular requirements - Floor treatment machines and wet scrubbing machines
- AS/NZS 3350.2.10:1996/Amdt 3:2007 Safety of household and similar electrical appliances Particular requirements - Floor treatment machines and wet scrubbing machines (IEC 60335-2-10:1992, MOD)
- AS/NZS 3580.9.10:2006 Methods for sampling and analysis of ambient air Determination of suspended particulate matter - PM2.5 low volume sampler - Gravimetric method
- AS/NZS 4266.10:1995 Reconstituted wood-based panels - Methods of test Determination of glue bond durability (boil test)
- AS/NZS 4266.10:1995/Amdt 1:1997 Reconstituted wood-based panels - Methods of test - Determination of glue bond durability (boil test)
- AS/NZS 4695.10.2:1997 Fire hazard testing of electrotechnical products Guidance and test methods for the minimization of the effects of abnormal heat on electrotechnical products involved in fires - Method for testing products made from non-metallic materials for resistance to heat using the ball pressure test
- AS/NZS 4695.2.10:1996 Fire hazard testing of electrotechnical products Test methods - Glow-wire test methods - General
- AS/NZS 60079.10.1:2009/Amdt 1:2013 Explosive atmospheres Classification of areas - Explosive gas atmospheres (IEC 60079-10-1, Ed.1.0(2008) MOD)
- AS/NZS 60695.10.2:2002 Fire hazard testing Guidance and test methods for the minimization of the effects of abnormal heat on electrotechnical products involved in fires - Method for testing products made from non-metallic materials for resistance to heat using the ball pressure test (IEC 60695-10-2:1995, IDT)
- AS/NZS 61241.10:2005/Amdt 1:2007 Electrical apparatus for use in the presence of combustible dust Classification of areas where combustible dusts are or may be present
- AS/NZS ISO 7176.10:2011 Wheelchairs Determination of obstacle-climbing ability of electrically powered wheelchairs
- ASTM 51026-23 Standard Practice for Using the Fricke Dosimetry System
- ASTM 52303-24 Standard Guide for Absorbed-Dose Mapping in Radiation Processing Facilities
- ASTM A1-00(2018) Standard Specification for Carbon Steel Tee Rails
- ASTM A1000/A1000M-17(2023) Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality