
【国外标准】 American National Standard Guide for Construction of Test Sites for Performing Radiated Emission Measurements
本网站 发布时间:
2025-04-28
- IEEE/ANSI C63.7-2015
- 定价: 81元 / 折扣价: 69 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
This guide provides information on construction of radiated emission test facilities in the frequency range of 30 MHz to 40 GHz. Standardized site validation methods above 18 GHz remain unavailable at present, however the changes in this edition are considered appropriate guidance for use up to 40 GHz. In general, the construction techniques described apply either below 1 GHz, or for 1 GHz and above. This guide does not address construction code compliance issues. Parties responsible for the… read more design and construction of test sites are advised to consult with the various authorities having jurisdiction (AHJ) to determine the building, HVAC, plumbing, electrical, etc., codes and regulations that are applicable for the test site. In addition, beyond the similarity of basic principles, this guide also does not specifically address considerations on construction of test sites used for calibration of antennas used in EMC radiated emissions measurements; that topic is covered in ANSI C63.5.1,2 In addition, site-dependent measurement instrumentation and signal cabling issues are not in the scope of this guide. read less
标准号:
IEEE/ANSI C63.7-2015
标准名称:
American National Standard Guide for Construction of Test Sites for Performing Radiated Emission Measurements
英文名称:
标准状态:
-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM E2752-10(2015) Standard Guide for Evaluation of Residual Effectiveness of Antibacterial Personal Cleansing Products
- ASTM E2784-10(2015) Standard Test Method for Evaluation of the Effectiveness of Handwash Formulations Using the Paper Towel (Palmar) Method of Hand Contamination
- ASTM F1035-03(2015) Standard Practice for Use of Rubber-Cord Pie Disk to Demonstrate the Discernment Capability of a Tire X-ray Imaging System
- ASTM F2255-05(2015) Standard Test Method for Strength Properties of Tissue Adhesives in Lap-Shear by Tension Loading
- ASTM F2258-05(2015) Standard Test Method for Strength Properties of Tissue Adhesives in Tension
- ASTM F2392-04(2015) Standard Test Method for Burst Strength of Surgical Sealants
- ASTM F2819-10(2015)e2 Standard Test Methods for Measurement of Straightness of Bar, Rod, Tubing and Wire to be used for Medical Devices
- ASTM F665-09(2015) Standard Classification for Vinyl Chloride Plastics Used in Biomedical Application
- ASTM C661-15(2022) Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
- ASTM C662-16(2021) Standard Specification for Impervious Graphite Pipe and Threading
- ASTM C664-10(2020) Standard Test Methods for Thickness of Diffusion Coating
- ASTM C670-15 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
- ASTM C675-91(2022) Standard Test Method for Alkali Resistance of Ceramic Decorations on Returnable Beverage Glass Containers
- ASTM C676-04(2019) Standard Test Method for Detergent Resistance of Ceramic Decorations on Glass Tableware
- ASTM C680-23a Standard Practice for Estimate of the Heat Gain or Loss and the Surface Temperatures of Insulated Flat, Cylindrical, and Spherical Systems by Use of Computer Programs