【国外标准】 Standard Test Method for K-slump of Freshly Mixed Concrete

5.1 This test method permits a rapid assessment of the consistency of freshly mixed concrete.5.2 This test method can be used to provide information on the change in consistency with time of a freshly mixed concrete mixture. It is especially valuable for assessing the consistency of flowing or self-consolidating concrete mixtures.5.3 This test method can be used to assess batch-to-batch variations in consistency of freshly mixed concrete.5.4 There is no general reliable relationship between the K-slump value and slump measured in accordance with Test Method C143/C143M or slump flow measured in accordance with Test Method C1611/C1611M. However, this test method is useful as a quality control tool. For example, the user can make trial batches in the laboratory and determine the range in K-slump corresponding to an acceptable range in slump or slump flow. That range in K-slump can be used to check the consistency of field batches.5.5 This test method is not suitable as the basis for acceptance or rejection of concrete.1.1 This test method covers determination the K-slump of freshly mixed concrete, both in the laboratory and in the field.1.2 The values stated SI units are the standard. No other units of measurement are included in this standard.1.3 The text of this standard refers to notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. (Warning—Fresh hydraulic cementitious mixtures are caustic and may cause chemical burns to skin and tissue upon prolonged exposure.2)1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.