
【国外标准】 Standard Guide for Establishing and Operating a Public Information, Education, and Relations Program for Emergency Medical Service Systems
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
4.1 It is essential to have the public's understanding and support for the EMS system to ensure its proper development and utilization.4.2 This guide encompasses those procedures, considerations, and resources that are necessary for a successful EMS public information, education, and relations program. Complex EMS systems may integrate or augment, or both, this guide in its entirety. Less complex systems may need to collaborate with other EMS organizations and related agencies. Responsibility for this guide will vary by level of authority, that is, state, regional, and local. (See Guide F1086.)4.3 The PIER tasks involve research, planning, production, distribution, and evaluation. Production requires significant resources and expertise and may be done most appropriately at the higher level, such as regional, state, and national levels.1.1 The purpose of this guide is to provide national voluntary standards and recommendations to effectively provide emergency medical service system information and education to the public.1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM F1268-90(2020)
标准名称:
Standard Guide for Establishing and Operating a Public Information, Education, and Relations Program for Emergency Medical Service Systems
英文名称:
Standard Guide for Establishing and Operating a Public Information, Education, and Relations Program for Emergency Medical Service Systems标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ANSI X9.100-160-2-2020 Magnetic Ink Printing (MICR) - Part 2 EPC Field Use
- ANSI X9.112-2-2020 Wireless Management and Published Security - Part 2: POS and ATM
- ANSI X9.117-2020 Financial Services - Mutual Authentication for Secure Remote Access
- ANSI X9.134-1-2020 Core Banking: Mobile Financial Services - General Framework
- ANSI X9.138-2020 Distributed Ledger Technologies (DLT) Terminology
- ANSI X9.99-2009 (R2020) Financial Services-Privacy Impact Assessment
- ASTM D4882-17 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Twisted-Coil Test
- ASTM D4883-18 Standard Test Method for Density of Polyethylene by the Ultrasound Technique
- ASTM D4886-23 Standard Test Method for Abrasion Resistance of Geotextiles (Sandpaper/Sliding Block Method)
- ASTM D4887/D4887M-11(2021)e1 Standard Practice for Preparation of Viscosity Blends for Hot Recycled Asphalt Materials
- ASTM D4889-21 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates
- ASTM D4891-13(2018) Standard Test Method for Heating Value of Gases in Natural Gas and Flare Gases Range by Stoichiometric Combustion
- ASTM D4894-19 Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials
- ASTM D4895-18(2023) Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion
- ASTM D4897/D4897M-16(2023) Standard Specification for Asphalt-Coated Glass-Fiber Venting Base Sheet Used in Roofing