
【国外标准】 Standard Test Methods for Chemical Analysis of Zinc Yellow Pigment (Zinc Chromate Yellow)
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
3.1 This test method has been developed to standardize the chemical analysis of zinc chromate yellow pigment and to provide alternate methods of analysis for chromium and zinc.1.1 These test methods cover procedures for the chemical analysis of the pigment known commercially as “zinc yellow” or “zinc chromate yellow.”1.2 The analytical procedures appear in the following order: SectionsMoisture and Other Volatile Matter 7Combined Water 8Chromium: Dichromate Method 9 – 11 Thiosulfate Method 9, 12, and 13Zinc: Hydroxyquinoline Method 9, 14, and 15 Ferrocyanide Method 9, 16, and 17Alkaline Salts 18 and 19Sulfates 20 and 21Chlorides 22 and 23Matter Insoluble in Dilute Acetic Acid 24Coarse Particles 251.3 The values stated in SI units are to be considered the standard. The values given in parentheses are for information only.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM D444-88(2020)
标准名称:
Standard Test Methods for Chemical Analysis of Zinc Yellow Pigment (Zinc Chromate Yellow)
英文名称:
Standard Test Methods for Chemical Analysis of Zinc Yellow Pigment (Zinc Chromate Yellow)标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ANSI X9.100-160-2-2020 Magnetic Ink Printing (MICR) - Part 2 EPC Field Use
- ANSI X9.112-2-2020 Wireless Management and Published Security - Part 2: POS and ATM
- ANSI X9.117-2020 Financial Services - Mutual Authentication for Secure Remote Access
- ANSI X9.134-1-2020 Core Banking: Mobile Financial Services - General Framework
- ANSI X9.138-2020 Distributed Ledger Technologies (DLT) Terminology
- ANSI X9.99-2009 (R2020) Financial Services-Privacy Impact Assessment
- ASTM D3550/D3550M-17 Standard Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils
- ASTM D3551-17 Standard Practice for Laboratory Preparation of Soil-Lime Mixtures Using Mechanical Mixer
- ASTM D3552-17 Standard Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites
- ASTM D3554-20e1 Standard Specification for Track-Resistant Thermoplastic High-Density Polyethylene Insulation for Wire and Cable, 75 °C Operation
- ASTM D3556-23 Standard Guide for Deposition on Glassware During Mechanical Dishwashing
- ASTM D3557-17 Standard Test Methods for Cadmium in Water
- ASTM D3561-16(2021)e1 Standard Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry
- ASTM D3562-22 Standard Performance Specification for Woven Drycleanable Coat Fabrics
- ASTM D3564-22 Standard Practice for Application of Floor Polishes to Maintain Vinyl Composition Tile or Flooring