
【国外标准】 Standard Specification for Purified Terephthalic Acid (PTA)
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
This specification establishes requirements for purified terephthalic acid (PTA) used in the manufacturing of polymers, including the production of polyesters for fiber, filament, yarn, film, coating, bottle and resin applications. For purposes of determining conformance with this specification, an observed value or a calculated value shall be rounded off to the nearest unit in the last right-hand digit used in expressing the specification limit. This specification covers properties and sampling of the material.1.1 This specification covers purified terephthalic acid (PTA) for use in the manufacturing of polymers. Some examples include the production of polyesters for fiber, filament, yarn, film, coating, bottle and resin applications.1.2 The following applies to all specified limits in this specification: for purposes of determining conformance with this specification, an observed value or a calculated value shall be rounded off to the nearest unit in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.4 Consult current OSHA regulations, supplier’s Safety Data Sheets, and local regulations for all materials used in this specification.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM D7976-14(2020)
标准名称:
Standard Specification for Purified Terephthalic Acid (PTA)
英文名称:
Standard Specification for Purified Terephthalic Acid (PTA)标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- AS/NZS 2891.14.1.2:1999 Methods of sampling and testing asphalt Field density tests - Determination of field density of compacted asphalt using a nuclear surface moisture-density gauge - Backscatter mode
- AS/NZS 2891.14.2:1999 Methods of sampling and testing asphalt Field density tests - Determination of field density of compacted asphalt using a nuclear thin-layer density gauge
- AS/NZS 2891.14.4:1999 Methods of sampling and testing asphalt Field density tests - Calibration of nuclear surface moisture-density gauge - Backscatter mode
- AS/NZS 2891.14.5:1999 Methods of sampling and testing asphalt Field density tests - Density ratio of compacted asphalt
- AS/NZS 3350.2.14:1995/Amdt 3:2001 Safety of household and similar electrical appliances - Particular requirements
- AS/NZS 3350.2.14:1995/Amdt 4:2008 Safety of household and similar electrical appliances Particular requirements for kitchen machines
- AS/NZS 3750.14:1997 (R2013) Paints for steel structures High-build epoxy (two-pack)
- AS/NZS 4266.14:1995 Reconstituted wood-based panels - Methods of test Determination of dimensional change with relative humidity
- AS/NZS 4387.14:1996 Domestic kitchen assemblies - Methods of test Determination of strength of handles
- AS/NZS 4456.14:2003/Amdt 1:2004 Masonry units, segmental pavers and flags - Methods of test Determining water absorption properties
- AS/NZS 4456.14:2003/Amdt 2:2009 Masonry units, segmental pavers and flags - Methods of test Determining water absorption properties
- AS/NZS 4524.14:1998 Bonded abrasive products - Dimensions Grinding wheels for deburring and fettling/snagging on an angle grinder
- AS/NZS 60079.14:2009/Amdt 1:2011 Explosive atmospheres Electrical installations design, selection and erection (IEC 60079-14, Ed 4.0 (2007) MOD)
- AS/NZS 60335.2.14:2013 Household and similar electrical appliances - Safety Particular requirements for kitchen machines (IEC 60335-2-14 Ed 5.2, MOD)
- AS/NZS 61000.4.14:2012 Electromagnetic compatibility (EMC) Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase