
【国外标准】 Standard Practice for Chemical Protective Clothing Program
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
4.1 This practice presents those elements that constitute a chemical protective clothing (CPC) program and conditions to be used in establishing a program for the selection and use of CPC. Adherence to this practice requires that a written program be developed for any use of CPC.4.2 Although much remains to be determined regarding the toxicity of vapor and liquid exposure to the skin, this practice outlines the essential information necessary and suggested methods for hazard risk assessment prior to the selection of CPC (see Practices F1154).4.3 This practice does not address the various methods for testing CPC or obtaining the data upon which CPC assessments are made. These test methods are listed in Section 2 of this practice.4.4 This practice does not include recommendations that may apply to personal protection from nuclear radiation, radioactive contamination, or microbiological organisms, or to clothing that is worn to protect a particular environment from the entry of chemicals, particles, or living matter that may arise from the wearer.4.5 CPC should be used when other means of control are not available. Its major uses should be limited to the following:4.5.1 Maintenance operations;4.5.2 Upset or emergency conditions;4.5.3 Use in lieu of engineering controls when they are not feasible or are being installed;4.5.4 Supplementing feasible engineering controls when they fail to control the hazard completely; and4.5.5 Use in the event that engineering controls fail.4.6 Engineering controls and substitution of materials should be stressed as the first line of defense in all control situations since effective use of CPC depends on worker compliance, proper selection, quality control, and other variables that may prove to be weak links in an overall control process.1.1 This practice is intended to promote the proper selection, use, maintenance, and understanding of the limitations of chemical protective clothing (CPC) by users, employers, employees, and other persons involved in programs requiring CPC, thereby limiting potentially harmful and unnecessary skin exposures.1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM F1461-17
标准名称:
Standard Practice for Chemical Protective Clothing Program
英文名称:
Standard Practice for Chemical Protective Clothing Program标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM B1-13(2018) Standard Specification for Hard-Drawn Copper Wire
- ASTM B100-20 Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use
- ASTM B1002-16(2020) Standard Specification for Refined Indium
- ASTM B1003-16(2023) Standard Specification for Seamless Copper Tube for Linesets
- ASTM B1004-16(2022) Standard Practice for Contact Performance Classification of Electrical Connection Systems
- ASTM B1005-17(2023) Standard Specification for Copper-Clad Aluminum Bar for Electrical Purposes (Bus Bar)
- ASTM B1008-18 Standard Test Method for Stress-Strain Testing for Overhead Electrical Conductors
- ASTM B1010/B1010M-19 Standard Specification for Copper-Clad Steel Electrical Conductor for Tracer Wire Applications
- ASTM B1011/B1011M-22 Standard Specification for Cobalt Alloy Spring Wire
- ASTM B1013-22 Standard Specification for High Fluidity (HF) Zinc-Aluminum Alloy Thin Wall Die Castings
- ASTM B1014-20 Standard Specification for Welded Copper and Copper Alloy Condenser and Heat Exchanger Tubes with a Textured Surface(s)
- ASTM B1019-21 Standard Test Method for Determination of Surface Oxides on Copper Rod(for Electrical Purposes)
- ASTM B1020/B1020M-22 Standard Specification for Seamless Nickel Alloy Mechanical Tubing and Hollow Bar
- ASTM B1021-21 Standard Test Method for Peel Resistance of Metal Sheets Joined by High Strength Bonds
- ASTM B1022-22 Standard Specification for Zinc-Aluminum-Magnesium Alloys in Ingot Form for Coating Steel Sheet by the Hot-Dip Process