
【国外标准】 Standard Practice for Commercial Unmanned Aircraft System (UAS) Pilot Practical Test Standards for Unmanned Aircraft Single-Engine Land (SEL) Remote Control and Autonomous/Semiautonomous (Withdrawn 2014)
本网站 发布时间:
2024-02-28
- ASTM F2636-08
- Withdrawn, No replacement
- 定价: 0元 / 折扣价: 0 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
Unmanned aircraft present unique challenges for applicants and examiners. Unlike manned aircraft, in which, regardless of the size and complexity of the aircraft, there are still basic similarities in concepts and operations, unmanned aircraft are varied in both flight capability and pilot interaction. Many aspects of unmanned aircraft operations are automated, and the pilots may not have the same information available to them (that is, pitch and bank) that pilots flying manned aircraft have available to them. This will create a situation in which some unmanned aircraft systems (UAS) will not be capable of meeting all the requirements of this practice or will not require the same skill sets that manned aircraft require.The examiner will have to decide which tasks the applicant's UAS will be capable of completing and test those tasks. As required, the examiner will note any limitations as a result of the UAS being incapable of performing a task on the applicant's certificate per 14 CFR 61.45(b)(2). If the applicant desires to have a certificate with no restrictions or limitations, he/she will need to use a UAS that is capable of completing all the tasks in this practice.Information considered directive in nature is described in this practice by the use of “shall” and “must” indicating the actions are mandatory. Guidance information is described in terms such as “should” and “may” indicating the actions are desirable or permissive but not mandatory. A list of acronyms is in Section 3.This practice includes the areas of operation and tasks that will demonstrate the pilot's ability to fly the unmanned aircraft safely and proficiently.1.1 This practice defines the knowledge, skills, and abilities required of unmanned aircraft pilots to be able to fly unmanned aircraft—single-engine land (SEL) in the national airspace system safely and for hire.1.2 The commercial unmanned aircraft systems (UAS) pilot practical test standards (PTS)-unmanned aircraft include the areas of operation and tasks that will demonstrate the pilot's ability to fly the unmanned aircraft safely and proficiently.1.3 This practice does not apply to pilots who will fly mini/small unmanned aerial vehicles (UAVs) for hire within visual range of the pilot, mini/small UAVs being those UAVs listed as lightly regulated.1.4 This practice provides a PTS intended to meet the Civil Aviation Authority’s (CAA) requirements for issuing commercial UAS pilot authorizations.1.5 The values given in inch-pound units are to be regarded as the standard. The values in parentheses are for information only.1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
标准号:
ASTM F2636-08
标准名称:
Standard Practice for Commercial Unmanned Aircraft System (UAS) Pilot Practical Test Standards for Unmanned Aircraft Single-Engine Land (SEL) Remote Control and Autonomous/Semiautonomous (Withdrawn 2014)
英文名称:
Standard Practice for Commercial Unmanned Aircraft System (UAS) Pilot Practical Test Standards for Unmanned Aircraft Single-Engine Land (SEL) Remote Control and Autonomous/Semiautonomous (Withdrawn 2014)标准状态:
Withdrawn, No replacement-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM D8137-18(2023) Practice for Accelerated Aging of Leather
- ASTM D8138-23 Standard Specification for Preformed Silicone Joint Sealing System for Bridges
- ASTM D8139-23 Standard Specification for Semi-Rigid, Closed-Cell Polypropylene Foam, Preformed Expansion Joint Fillers for Concrete Paving and Structural Construction
- ASTM D814-95(2020) Standard Test Method for Rubber Property—Vapor Transmission of Volatile Liquids
- ASTM D8140-18(2023) Standard Guide for the Use of Foundry Sand in Asphalt Mixtures
- ASTM D8141-22 Standard Guide for Selecting Volatile Organic Compounds (VOCs) and Semi-Volatile Organic Compounds (SVOCs) Emission Testing Methods to Determine Emission Parameters for Modeling of Indoor Environments
- ASTM D8144-22 Standard Test Method for Separation and Determination of Aromatics, Nonaromatics, and FAME Fractions in Middle Distillates by Solid-Phase Extraction and Gas Chromatography
- ASTM D8148-22 Standard Test Method for Spectroscopic Determination of Haze in Fuels
- ASTM D8149-20 Standard Practice for Optimization, Calibration, and Validation of Ion Chromatographic Determination of Heteroatoms and Anions in Petroleum Products and Lubricants
- ASTM D8150-22 Standard Test Method for Determination of Organic Chloride Content in Crude Oil by Distillation Followed by Detection Using Combustion Ion Chromatography
- ASTM D8152-18 Standard Practice for Measuring Field Infiltration Rate and Calculating Field Hydraulic Conductivity Using the Modified Philip Dunne Infiltrometer Test
- ASTM D8154-24 Standard Test Methods for 1H-NMR Determination of Ketone-Ethylene-Ester and Polyvinyl Chloride Contents in KEE-PVC Roofing Fabrics
- ASTM D8155-17(2023) Standard Practice for Shake Extraction of Solid Mining and Metallurgical Processing Waste with Water
- ASTM D816-06(2023) Standard Test Methods for Rubber Cements
- ASTM D8160-20 Standard Test Method for Un-notched Cantilever Beam Impact Resistance (Izod Impact) Testing of Thermoplastic Pavement Marking Materials