
【国外标准】 Standard Test Method for Boiling Point Distribution of Hydrocarbon Solvents by Gas Chromatography
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
5.1 The gas chromatographic determination of the boiling point distribution of hydrocarbon solvents can be used as an alternative to conventional distillation methods for control of solvents quality during manufacture, and specification testing.5.2 Boiling point distribution data can be used to monitor the presence of product contaminants and compositional variation during the manufacture of hydrocarbon solvents.5.3 Boiling point distribution data obtained by this test method are not equivalent to those obtained by Test Methods D86, D850, D1078, D2887, D2892, and D3710.1.1 This test method covers the determination of the boiling point distribution of hydrocarbon solvents by capillary gas chromatography. This test method is limited to samples having a minimum initial boiling point of 37 °C (99 °F), a maximum final boiling point of 285 °C (545 °F), and a boiling range of 5 °C to 150 °C (9 °F to 270 °F) as measured by this test method.1.2 For purposes of determining conformance of an observed or calculated value using this test method to relevant specifications, test result(s) shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.1.3 The values stated in SI units are standard. The values given in parentheses are for information purposes only.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM D5399-09(2023)
标准名称:
Standard Test Method for Boiling Point Distribution of Hydrocarbon Solvents by Gas Chromatography
英文名称:
Standard Test Method for Boiling Point Distribution of Hydrocarbon Solvents by Gas Chromatography标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM D4953-20 Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method)
- ASTM D4954-89(2017) Standard Test Method for Determination of Nitrilotriacetates in Detergents
- ASTM D4957-18 Standard Test Method for Apparent Viscosity of Asphalt Emulsion Residues and Non-Newtonian Asphalts by Vacuum Capillary Viscometer
- ASTM D4958-24 Standard Test Method for Comparison of the Brush Drag of Latex Paints
- ASTM D4960-20 Standard Test Method for Evaluation of Color for Thermoplastic Pavement Marking Materials
- ASTM D4963/D4963M-22 Standard Test Method for Ignition Loss of Glass Fiber Strands and Fabrics
- ASTM D4964-96(2020) Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine)
- ASTM D4967-21 Standard Guide for Selecting Materials to Be Used for Insulation, Jacketing, and Strength Components in Fiber-Optic Cables
- ASTM D4968-19a Standard Practice for Annual Review of Test Methods and Specifications for Plastics
- ASTM D4969-17(2022) Standard Specification for Polytetrafluoroethylene–(PTFE) Coated Glass Fabric
- ASTM D4972-19 Standard Test Methods for pH of Soils
- ASTM D4976-12a(2020) Standard Specification for Polyethylene Plastics Molding and Extrusion Materials
- ASTM D4977/D4977M-20 Standard Test Method for Granule Adhesion to Mineral-Surfaced Roofing by Abrasion
- ASTM D4981-19 Standard Practice for Screening of Oxidizers in Waste
- ASTM D4982-20 Standard Test Methods for Flammability Potential Screening Analysis of Waste