
【国外标准】 Electromagnetic Compatibility (EMC) - Part 4-17: Testing and Measurement Techniques - Ripple on d.c. Input Power Port Immunity Test (Adopted CEI/IEC 61000-4-17:1999, first edition, 1999-06, including Amendment 1:2001)
本网站 发布时间:
- CAN/CSA-CEI/IEC 61000-4-17-02
- 现行
- 定价: 546元 / 折扣价: 465 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
1 Scope
This part of IEC 61000 defines test methods for immunity to ripple at
the d.c. input power port of electrical or electronic equipment. This standard is applicable to low-voltage d.c. power ports of
equipment supplied by external rectifier syst
标准号:
CAN/CSA-CEI/IEC 61000-4-17-02
标准名称:
Electromagnetic Compatibility (EMC) - Part 4-17: Testing and Measurement Techniques - Ripple on d.c. Input Power Port Immunity Test (Adopted CEI/IEC 61000-4-17:1999, first edition, 1999-06, including Amendment 1:2001)
英文名称:
Electromagnetic Compatibility (EMC) - Part 4-17: Testing and Measurement Techniques - Ripple on d.c. Input Power Port Immunity Test (Adopted CEI/IEC 61000-4-17:1999, first edition, 1999-06, including Amendment 1:2001)标准状态:
现行-
发布日期:
-
实施日期:
出版语种:
英文
- 其它标准
- 上一篇: CAN/CSA-CEI/IEC 61000-4-16-02 Electromagnetic Compatibility (EMC) - Part 4-16: Testing and Measurement Techniques - Test for Immunity to Conducted, Common Mode Disturbances in the Frequency Range 0 Hz to 150 kHz (Adopted CEI/IEC 61000-4-16:1998, first edition, 1998-01, including Amend
- 下一篇: CAN/CSA-CEI/IEC 61000-4-2-01(R2009) Electromagnetic Compatibility (EMC) - Part 4-2: Testing and Measurement Techniques - Electrostatic Discharge Immunity Test
- 推荐标准
- ASTM D6258-17 Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels
- ASTM D6284-17(2023) Standard Test Method for Rubber Property—Effect of Aqueous Solutions with Available Chlorine and Chloramine
- ASTM D6287-17 Standard Practice for Cutting Film and Sheeting Test Specimens
- ASTM D6306-17 Standard Guide for Placement and Use of Diffusive Samplers for Gaseous Pollutants in Indoor Air
- ASTM D6316-17 Standard Test Method for Determination of Total, Combustible and Carbonate Carbon in Solid Residues from Coal and Coke
- ASTM D6338-17 Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPV) Based on ASTM Standard Test Methods
- ASTM D6346-17 Standard Guide for Accepting, Segregating, and Packaging Materials Collected Through Household Hazardous Waste Programs
- ASTM D6371-17a Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels
- ASTM D6580-17(2023) Standard Test Method for The Determination of Metallic Zinc Content in Both Zinc Dust Pigment and in Cured Films of Zinc-Rich Coatings
- ASTM D6609-17 Standard Guide for Part-Stream Sampling of Coal
- ASTM D6691-17 Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in the Marine Environment by a Defined Microbial Consortium or Natural Sea Water Inoculum
- ASTM D6712-17 Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes
- ASTM D6749-02(2018) Standard Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method)
- ASTM D6753/D6753M-02(2023) Standard Specification for Coal Tar Adhesive
- ASTM D6764-02(2019) Standard Guide for Collection of Water Temperature, Dissolved-Oxygen Concentrations, Specific Electrical Conductance, and pH Data from Open Channels