【国外标准】 Standard Practice for Kit Assembly Instructions of Aircraft Intended Primarily for Recreation

This practice covers the instructions a kit producer must provide to a consumer in order to assemble and safely flight-test a recreational aircraft to ensure compliance with applicable ASTM standards. The instructions prescribe the necessary mechanical skills or training, or both, required for successful completion of the kit, as well as necessary tooling, fixtures, inspections, measurements, and other pertinent items required for successful completion of the kit. The kit assembly instructions (KAI) shall include at least the following information: (1) Revisions; (2) Introduction and instructions for using the KAI; (3) Table of Contents; (4) Safety Summary; (5) Applicable standards and specifications; (6) Terminology; (7) Required consumer abilities and responsibilities; (8) Required equipment and environmental conditions; (9) Parts list; (10) Assembly operations; (11) Final assembly Inspections; (12) Flight-test procedures; and (13) Additional requirements.1.1 This practice covers the instructions a kit producer must provide to a consumer in order to assemble and safely flight-test a recreational aircraft to ensure compliance with applicable ASTM standards.1.2 The instructions prescribe the necessary mechanical skills or training, or both, required for successful completion of the kit, as well as necessary tooling, fixtures, inspections, measurements, and other pertinent items required for successful completion of the kit. Proof of compliance with these instructions may be vital for obtaining flight authorizations from the applicable CAA.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.