
【国外标准】 Standard Practice for Visual Signals Between Persons on the Ground and in Aircraft During Ground Emergencies
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
3.1 While many of the reasons for needing the signals contained in this practice have been overcome by technology development, situations still arise where voice communications cannot be established between aircraft and persons on the ground during emergencies. This is particularly true of persons in distress, who typically have no communications equipment. These signals continue to meet the need for communications.3.2 Most of these signals have been adopted by international convention, the others by civilian and military agencies of the United States Government. The signals described in this practice are intended for use on land and can be made without special equipment such as flares or colored panels. Other signaling systems are described in the National Search and Rescue (SAR) Manual.33.3 The signals are also useful in situations where either complete or partial voice communications exist. Where only partial capabilities exist, for example, a ground unit with receive-only capability, the aircrew can transmit voice and the ground crew can respond with the appropriate signal.3.3.1 The signals described in Section 4, by their nature, are not intended for real-time communications with aircraft. They can be left unattended as messages for aircrews. Persons on the ground (SAR or otherwise) can make a signal and continue on without contact with the aircraft. The SAR personnel should keep this in mind when encountering the signals of Fig. 1.FIG. 1 Ground-to-Air Signals3.4 Search and rescue agencies utilizing this practice should disseminate these signals to the public as part of their preventative search and rescue (PSAR) efforts. The signals have changed over the years and a number of publications contain obsolete signals.1.1 This practice covers the signals to be used between persons on the ground and in aircraft when two-way voice communications cannot be established during ground emergencies. Ground signals are limited to land-based ones that do not require special equipment. Flare, light, panel, and maritime signals are specifically excluded.1.2 The signals are divided into two categories: those used by persons on the ground and those used by aircraft.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM F1591-95(2019)
标准名称:
Standard Practice for Visual Signals Between Persons on the Ground and in Aircraft During Ground Emergencies
英文名称:
Standard Practice for Visual Signals Between Persons on the Ground and in Aircraft During Ground Emergencies标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM E423-71(2019) Standard Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens
- ASTM E424-71(2023) Standard Test Methods for Solar Energy Transmittance and Reflectance (Terrestrial) of Sheet Materials
- ASTM E431-96(2022) Standard Guide to Interpretation of Radiographs of Semiconductors and Related Devices
- ASTM E433-71(2023) Standard Reference Photographs for Liquid Penetrant Inspection
- ASTM E434-10(2020) Standard Test Method for Calorimetric Determination of Hemispherical Emittance and the Ratio of Solar Absorptance to Hemispherical Emittance Using Solar Simulation
- ASTM E436-03(2021) Standard Test Method for Drop-Weight Tear Tests of Ferritic Steels
- ASTM E438-92(2024) Standard Specification for Glasses in Laboratory Apparatus
- ASTM E439-23 Standard Test Methods for Chemical Analysis of Beryllium
- ASTM E445/E445M-15(2019) Standard Test Method for Stopping Distance on Paved Surfaces Using a Passenger Vehicle Equipped with Full-Scale Tires
- ASTM E446-20 Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness
- ASTM E45-18a(2023) Standard Test Methods for Determining the Inclusion Content of Steel
- ASTM E452-02(2023) Standard Test Method for Calibration of Refractory Metal Thermocouples Using a Radiation Thermometer
- ASTM E454-12(2021) Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)
- ASTM E455-19 Standard Test Method for Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings
- ASTM E457-08(2020) Standard Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter