- 您的位置:
- 快3网下载安装到手机 >>
- 全部标准分类 >>
- 国外标准 >>
- CSA >>
- CAN/CSA-C60871-1-03 Shunt Capacitors for A.C. Power Systems Having a Rated Voltage Above 1 000 V - Part 1: General - Performance, Testing and Rating - Safety Requirements - Guide for Installation and Operation (Adopted CEI/IEC 60871-1:1997, second edition, 1997-10, with Cana

【国外标准】 Shunt Capacitors for A.C. Power Systems Having a Rated Voltage Above 1 000 V - Part 1: General - Performance, Testing and Rating - Safety Requirements - Guide for Installation and Operation (Adopted CEI/IEC 60871-1:1997, second edition, 1997-10, with Cana
本网站 发布时间:
- CAN/CSA-C60871-1-03
- 现行
- 定价: 1274元 / 折扣价: 1083 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
1 Scope and object
This part of IEC 60871 is applicable to both capacitor units and
capacitor banks intended to be used, particularly, for power-factor correction of a.c. power systems having a rated voltage above 1 000 V and frequencies of 15 Hz to 60
标准号:
CAN/CSA-C60871-1-03
标准名称:
Shunt Capacitors for A.C. Power Systems Having a Rated Voltage Above 1 000 V - Part 1: General - Performance, Testing and Rating - Safety Requirements - Guide for Installation and Operation (Adopted CEI/IEC 60871-1:1997, second edition, 1997-10, with Cana
英文名称:
Shunt Capacitors for A.C. Power Systems Having a Rated Voltage Above 1 000 V - Part 1: General - Performance, Testing and Rating - Safety Requirements - Guide for Installation and Operation (Adopted CEI/IEC 60871-1:1997, second edition, 1997-10, with Cana标准状态:
现行-
发布日期:
-
实施日期:
出版语种:
英文
- 其它标准
- 上一篇: CAN/CSA-C60044-6-07 Instrument transformers - Part 6: Requirements for protective current transformers for transient performance (Adopted CEI/IEC 44-6:1992, first edition, 1992-03)
- 下一篇: CAN/CSA-C60871-2-03 Shunt Capacitors for A.C. Power Systems Having a Rated Voltage Above 1 000 V - Part 2: Endurance testing (Adopted CEI/IEC/TS 60871-2:1999, second edition, 1999-06)
- 推荐标准
- ASTM D632-12(2020)e1 Standard Specification for Sodium Chloride
- ASTM D6358-19e1 Standard Classification System and Basis for Specification for Poly (Phenylene Sulfide) (PPS) Injection Molding, Extrusion and Blow Molding Materials Using ISO Methods
- ASTM D6379-21e1 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection
- ASTM D6416/D6416M-16e1 Standard Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load
- ASTM D6514-03(2019)e1 Standard Test Method for High Temperature Universal Oxidation Test for Turbine Oils
- ASTM D6515-00(2023)e1 Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
- ASTM D6557-18e1 Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils
- ASTM D6570-18a(2023)e1 Standard Practice for Assigning Allowable Properties for Mechanically Graded Lumber
- ASTM D6602-13(2022)e1 Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both
- ASTM D6792-23c Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories
- ASTM D6794-20e1 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long (6 h) Heating Time
- ASTM D6795-19ae1 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Water and Dry Ice and a Short (30 min) Heating Time
- ASTM D6796-21e1 Standard Practice for Production of Coal, Coke and Coal Combustion Samples for Interlaboratory Studies
- ASTM D6808-02(2018)e1 Standard Practice for Competency Requirements of Reference Material Producers for Water Analysis
- ASTM D6881/D6881M-03(2020) Standard Classification for Standard Plastics Industry Bulk Box/Pallet Unit Size Classified By Bulk Density