【国外标准】 IEEE Recommended Practice for Instrumentation: Specifications for Magnetic Flux Density and Electric Field Strength Meters - 10 Hz to 3 kHz

本网站发布时间： 2025-04-28

IEEE 1308-1994
定价： 136元
在线阅读

开通会员免费在线看70000余条国内标准，赠送文本下载次数，单本最低仅合13.3元！还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权！查看详情>>

标准简介

适用范围：

This recommended practice identifies specifications that should be provided to characterize instrumentation used to measure the steady state rms values of magnetic and electric fields with sinusoidal frequency content in the range 10 Hz to 3 kHz in residential and occupational settings as well as in transportation systems. The dynamic ranges of interest are 0.01 ¿¿T (0.1 mG) to 10 mT (100 G) and 1 V/m to 30 kV/m for magnetic and electric fields, respectively. In addition, this recommended… read more practice ¿¿¿ Defines terminology ¿¿¿ Describes general characteristics of fields ¿¿¿ Surveys operational principles of instrumentation ¿¿¿ Indicates methods of calibration ¿¿¿ Identifies significant sources of error While field meter specifications are identified, frequencies and field levels that should be used for calibration purposes, and limits on measurement uncertainty are not recommended in this standard. Rathere, it is left to standards that describe measurement protocols for different environments to indicate specific calibration points and uncertainty requirements. NOTE¿¿¿For example, IEEE Std 644-1994 [B15]1 limits the total uncertainty during calibrations of magnetic and electric field meters used in the vicinity of ac power lines to A?3%. However, sources of uncertainty during calibration and measurements are identified and guidance is provided on how they should be combined to determine total measurement uncertainty. Throughout this recommended practice, the words a??magnetic flux densitya?? and a??magnetic fielda?? will be considered synonymous. In regard to electric field measurements, this recommended practice considers electric field meters that only measure the unperturbed electric field strength at a point in space (i.e., the electric field prior to the introduction of the field meter) or on conducting surfaces. Measurement protocols are not provided. Protocols for measuring electric and magnetic fields near power lines and video display terminals are described in IEEE Std 644-1994 [B15] and IEEE Std 1140-1994 [B16], respectively. Protocols for measuring only power frequency electric fields are described in IEC Publication 833 1987 [B11]. read less

基本信息

标准号：
IEEE 1308-1994
标准名称：
IEEE Recommended Practice for Instrumentation: Specifications for Magnetic Flux Density and Electric Field Strength Meters - 10 Hz to 3 kHz
英文名称：
标准状态：
发布日期：
实施日期：
出版语种：

标准分类号

标准ICS号：
中标分类号：

关联标准

替代以下标准：
被以下标准替代：
引用标准：
采用标准：

出版信息

页数：
字数：
开本：

其他信息

起草人：
起草单位：
归口单位：
提出部门：
发布部门：

其它标准

推荐标准