
【国外标准】 Standard Consumer Safety Specification for Bassinets and Cradles
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
1.1 This consumer safety specification covers performance requirements, test methods, and marking requirements to promote safe use of bassinets and cradles.1.2 This consumer safety performance specification is intended to minimize the risks of incidents to an infant resulting from normal use and reasonably foreseeable misuse of a bassinet or cradle.1.3 This consumer safety performance specification covers products primarily intended to provide sleeping accommodations for an infant up to approximately 5 months in age or when the child begins to push up on hands and knees, whichever comes first.1.3.1 Examples of Products under the :1.3.1.1 Bassinets, cradles, compact bassinets, and compact cradles.1.3.1.2 Cradle swings with an incline less than or equal to 10° from horizontal while in the rest (non-rocking) position.1.3.1.3 Multi-use products when they are in the bassinet/cradle or compact bassinet/cradle use mode as defined in 3.1.1 or 3.1.3.1.3.1.4 Bassinet/cradle accessories to products when removed from the product and used in the bassinet/cradle mode or as a compact bassinet/cradle product. See 3.1.2 for an example.1.3.1.5 Bassinet/cradle features for carriage/stroller when removed from the carriage/stroller and used in the bassinet/cradle mode or compact bassinet/cradle product mode.1.3.2 Examples of Products Excluded from the : 1.3.2.1 Sleep products that have only inclined sleeping surfaces intended to be greater than 10° from horizontal while in the rest (non-rocking) position.1.3.2.2 In-bed portable sleepers.1.3.2.3 Enclosed travel tents.1.4 No bassinet or cradle produced after the approval date of this consumer safety performance specification shall, either by label or other means, indicate compliance with this specification unless it conforms to all requirements contained herein.1.5 This consumer safety performance specification is not intended to address incidents and injuries resulting from alteration or unreasonable abuse or misuse of the product by a child or child care giver.1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.1.7 The following precautionary caveat pertains only to the test method portion Section 7 of this consumer safety performance specification This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.FIG. 1 CAMI Infant Dummy, Mark II 17.5 lb (7.9 kg)FIG. 2 CAMI Newborn Dummy 7.5 lb (3.4 kg)1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM F2194-22e1
标准名称:
Standard Consumer Safety Specification for Bassinets and Cradles
英文名称:
Standard Consumer Safety Specification for Bassinets and Cradles标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- AS ISO/IEC 17025-2005 (R2016)/Amdt 1-2006 General requirements for the competence of testing and calibration laboratories
- AS/NZS 1044:1995/Amdt 1:1997 Limits and methods of measurement of radio disturbance characteristics of electrical motor-operated and thermal appliances for household and similar purposes, electric tools and similar electric apparatus
- AS/NZS 1111:1996/Amdt 1:1997 ISO metric hexagon commercial bolts and screws
- AS/NZS 1134:1997/Amdt 1:1998 Wool - Determination of wool base and vegetable matter base of core samples of raw wool
- AS/NZS 1158.0:2005/Amdt 1:2008 Lighting for roads and public spaces Introduction
- AS/NZS 1158.1.1:1997/Amdt 1:1998 Road lighting - Vehicular traffic (Category V) lighting - Performance and installation design requirements
- AS/NZS 1158.2:2005/Amdt 1:2008 Lighting for roads and public spaces Computer procedures for the calculation of light technical parameters for Category V and Category P lighting
- AS/NZS 1170.1:2002 (R2016)/Amdt 1:2005 Structural design actions Permanent, imposed and other actions
- AS/NZS 1170.3 Supp 1:2003 Structural design actions Snow and ice actions - Commentary (Supplement to AS/NZS 1170.3:2003)
- AS/NZS 1221:1997/Amdt 1:2003 Fire hose reels (Reconfirmed 2020)
- AS/NZS 1300:2009/Amdt 1:2012 Electrical equipment for mines and quarries - Bolted explosion-protected three-phase cable coupling devices (Reconfirmed 2020)
- AS/NZS 1301.208s:1997/Amdt 1:1998 Methods of test for pulp and paper - Physical testing of pulp handsheets
- AS/NZS 1338.1:1992/Amdt 1:1994 Filters for eye protectors - Filters for protection against radiation generated in welding and allied operations
- AS/NZS 13818.1 Supp 1:1999 Information technology - Generic coding of moving pictures and associated audio information Systems - Registration procedures (Supplement to AS/NZS 13818.1:1997)
- AS/NZS 13818.2 Supp 1:1999 Information technology - Generic coding of moving pictures and associated audio information Video - Registration of copyright identifiers (Supplement to AS/NZS 13818.2:1997)