购物车
400-168-0010
【国外标准】 Identification cards - Recording technique - Part 1: Embossing
本网站 发布时间：
2024-08-08
开通会员免费在线看70000余条国内标准，赠送文本下载次数，单本最低仅合13.3元！还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权！
查看详情>>
标准简介适用范围：
Specifies requirements for embossed characters on identification cards. The embossed characters are intended for transfer of data either by use of imprinters or by visual or machine reading. It takes into consideration both human and machine aspects and states minimum requirements. It is the purpose of this document to provide criteria to which cards shall perform. No consideration is given within this document to the amount of use, if any, experienced by the card prior to test. Failure to conform to specified criteria is negotiated between the involved parties.ISO/IEC 10373-1 specifies the test procedures used to check cards against the parameters specified in this document.
标准号：
INCITS/ISO/IEC 7811-1:2018 (2020)
标准名称：
Identification cards - Recording technique - Part 1: Embossing
英文名称：
Identification cards - Recording technique - Part 1: Embossing标准状态：
现行-
发布日期：
-
实施日期：
出版语种：
- 推荐标准
- INCITS 100A-1991[S2010] Information Systems v Interface between Data Terminal Equipment (DTE) and Data Circuit-Terminating Equipment (DCE) for Operation with Packet-Switched Data Communications Networks (PSDN), or between Two DTEs, by Dedicated Circuit (NUI and NUI-Derived Facility Extentions (formerly ANSI X3.100a-1991 (R2000))
- INCITS 103-1983 (S2021) Unrecorded Magnetic Tape Minicassette For Information Interchange, Coplanar 3.81 mm (0.150 Inch)
- INCITS 11-1990 (S2017) General Purpose Paper Cards for Information Processing
- INCITS 111-1986 (S2017) Information Systems - Optical Character Recognition (OCR) - Matrix Character Sets for OCR-M
- INCITS 115-1984 (S2017) Unformatted 80 Megabyte Trident Pack for Use at 370 TPI and 6000 BPI - Physical, Mechanical and Magnetic Characteristics
- INCITS 116-1986 (S2017) Recorded Magnetic Tape Cartridge for Information Interchange 4-Track, Serial 0.250 in (6.30 mm) 6400 BPI (252 BPMM) Inverted Modified Frequency Modulation Encoded
- INCITS 117-1984 (S2017) Printable/Image Areas for Text and Facsimile Communication Equipment
- INCITS 119-1984 (S2017) Contact Start/Stop Storage Disk, 158361 Flux Transitions per Track, 8.268 Inch (210 mm) Outer Diameter and 3.937 Inch (100 mm) Inner Diameter
- INCITS 120-1984 (S2017) Contact Start/Stop Storage Disk, 95840 Flux Transitions per Track, 7.874 Inch (200 mm) Outer Diameter and 2.500 Inch (63.5 mm) Inner Diameter
- INCITS 121-1984 (S2021) Two-Sided Unformatted 8-Inch (200 MM) Double Density Flexible Disk Cartridge (For 13262 FTPR Two-headed Application) (Combined with Project 287)
- INCITS 121-1984[S2011] Two-Sided Unformatted 8-Inch (200-mm) Double Density Flexible Disk Cartridge, General, Physical, and Magnetic Requirements (for 13,262 FTPR Two-Headed Application) (formerly ANSI X3.121-1984 (R2001))
- INCITS 124-1985 (S2022) Information processing systems - Computer graphics - Graphical Kernel System (GKS) Functional Description
- INCITS 124-1985[S2012] Graphical Kernel System (GKS) Functional Description (includes ANSI X3.124.1-1985) (formerly ANSI X3.124-1985 (R1996))
- INCITS 124.1-1985 (S2021) FORTRAN Binding of Graphical Kernel System (GKS)
- INCITS 124.1-1985[S2011] Computer Graphics - Graphical Kernel System (GKS) FORTRAN Binding (formerly ANSI X3.124.1-1985 (R1996))
