
【国外标准】 Standard Guide for Properties of a Universal Healthcare Identifier (UHID) (Withdrawn 2022)
本网站 发布时间:
2024-02-28
- ASTM E1714-07(2013)
- Withdrawn, No replacement
- 定价: 0元 / 折扣价: 0 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
4.1 Recent experience with computer-based patient records (CPRs) has revealed many valuable potential benefits, but it has also become apparent that the effective application of this technology creates some new problems. CPRs offer the option for lifelong linkage of all records on a patient, from birth to death. Such longitudinal record linkage would make the patient’s entire past health history retrievable. This could make possible a quantum leap in the clinical practice of health care, but a reliable patient identifier is essential to make large-scale regional and nationwide record linkage feasible. The design of a patient identifier system is not a simple task. Incorrect record linkage would create confusion, at least, or possibly cause serious consequences. To gain the benefits from such an identifier, it must be used by all relevant organizations. A universal patient identifier system must resist unauthorized access to confidential clinical data.Furthermore, the creation of personal identifiers for the entire population must be a cost-effective process in light of ongoing fiscal constraints. The creation and administration of personal identifiers for the entire population must be accomplished at a cost that is widely accepted as affordable and justified. Last, but not least, a time pressure exists. The solution to the patient identifier challenge should use technology to facilitate rapid deployment of the system to permit the expeditious implementation of CPRs. A companion document, Guide E2553, provides the implementation strategy concerning how to actually implement the UHID system.1.1 This guide covers a set of requirements outlining the properties required to create a universal healthcare identifier (UHID) system. Use of the UHID is expected to initially be focused on the population of the United States but there is no inherent limitation on how widely these identifiers may be applied.1.2 This guide sets forth the fundamental considerations for a UHID that can support at least four basic functions effectively:1.2.1 Positive identification of patients when clinical care is rendered;1.2.2 Automated linkage of various computer-based records on the same patient for the creation of lifelong electronic health care files;1.2.3 Provision of a mechanism to support data security for the protection of privileged clinical information; and1.2.4 The use of technology for patient records handling to keep health care operating costs at a minimum.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
标准号:
ASTM E1714-07(2013)
标准名称:
Standard Guide for Properties of a Universal Healthcare Identifier (UHID) (Withdrawn 2022)
英文名称:
Standard Guide for Properties of a Universal Healthcare Identifier (UHID) (Withdrawn 2022)标准状态:
Withdrawn, No replacement-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM F3258-23 Standard Specification for Protectors for Rubber Insulating Gloves Meeting Specific Performance Requirements
- ASTM F3259-17 Standard Guide for Micro-computed Tomography of Tissue Engineered Scaffolds
- ASTM F3260-18 Standard Test Method for Determining the Flexural Stiffness of Medical Textiles
- ASTM F3262-17 Standard Classification System for Small Unmanned Aircraft Systems (sUASs) for Land Search and Rescue
- ASTM F3265-17(2023) Standard Test Method for Grid-Video Obstacle Measurement
- ASTM F3268-18a Standard Guide for in vitro Degradation Testing of Absorbable Metals
- ASTM F3270/F3270M-17 Standard Practice for Compression versus Load Properties of Gasket Materials
- ASTM F3273-17(2021)e1 Standard Specification for Wrought Molybdenum-47.5 Rhenium Alloy for Surgical Implants (UNS R03700)
- ASTM F3275-22 Standard Guide for Using a Force Tester to Evaluate Performance of a Brush Part Designed to Clean the Internal Channel of a Medical Device
- ASTM F3276-22 Standard Guide for Using a Force Tester to Evaluate the Performance of a Brush Part Designed to Clean the External Surface of a Medical Device
- ASTM F3277-19 Standard Specification for Cantilevered Steel Bunks Used in Detention and Correctional Facilities
- ASTM F3283/F3283M-18 Standard Specification for the Manufacturing of High-Voltage Proximity Alarm to be used for the Detection of Overhead High Voltage Alternating Current (AC)
- ASTM F3288/F3288M-20 Standard Specification for MRS-Rated Metric- and Inch-sized Crosslinked Polyethylene (PEX) Pressure Pipe
- ASTM F3292-19 Standard Practice for Inspection of Spinal Implants Undergoing Testing
- ASTM F3293-18 Standard Guide for Application of Test Soils for the Validation of Cleaning Methods for Reusable Medical Devices