
【国外标准】 Standard Specification for Elevators, Shipboard, Electromechanical Passenger, and Stores (Withdrawn 2002)
本网站 发布时间:
2024-02-28
- ASTM F916-85(1993)e1
- Withdrawn, No replacement
- 定价: 0元 / 折扣价: 0 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
1.1 This specification covers the general design, construction, installation, operation, and testing of shipboard elevators. The requirements contained in this specification apply to automatic, pushbutton, self-service passenger, and store elevators of the winding drum and traction type driven by electric motors. Elevators primarily used for the transportation of personnel shall also be classified as passenger elevators. 1.2 This specification may be issued to obtain any of the following as specified by the ordering information (see 5.1.1). 1.2.1 A preassembled system in a frame structure of adequate strength that will permit installation in an elevator trunk. 1.2.2 A system consisting of all elevator components that can be assembled and installed in an elevator trunk. 1.3 The values stated in inch-pound units are to be regarded as the standard.
标准号:
ASTM F916-85(1993)e1
标准名称:
Standard Specification for Elevators, Shipboard, Electromechanical Passenger, and Stores (Withdrawn 2002)
英文名称:
Standard Specification for Elevators, Shipboard, Electromechanical Passenger, and Stores (Withdrawn 2002)标准状态:
Withdrawn, No replacement-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM D4619-12(2018) Standard Practice for Inspection of Linings in Operating Flue Gas Desulfurization Systems
- ASTM D4623-16 Standard Test Method for Determination of In Situ Stress in Rock Mass by Overcoring Method—Three Component Borehole Deformation Gauge
- ASTM D4625-21 Standard Test Method for Middle Distillate Fuel Storage Stability at 43 °C (110 °F)
- ASTM D4626-23 Standard Practice for Calculation of Gas Chromatographic Response Factors
- ASTM D4630-19 Standard Test Method for Determining Transmissivity and Storage Coefficient of Low-Permeability Rocks by In Situ Measurements Using the Constant Head Injection Test
- ASTM D4631-18 Standard Test Method for Determining Transmissivity and Storativity of Low Permeability Rocks by In Situ Measurements Using Pressure Pulse Technique
- ASTM D4634-16(2022) Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA)
- ASTM D4636-17 Standard Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils
- ASTM D4637/D4637M-15(2021)e1 Standard Specification for EPDM Sheet Used in Single-Ply Roof Membrane
- ASTM D4638-16(2023) Standard Guide for Preparation of Biological Samples for Inorganic Chemical Analysis
- ASTM D464-15(2020) Standard Test Methods for Saponification Number of Pine Chemical Products Including Tall Oil and Other Related Products
- ASTM D4647/D4647M-13(2020) Standard Test Methods for Identification and Classification of Dispersive Clay Soils by the Pinhole Test
- ASTM D465-15(2020) Standard Test Methods for Acid Number of Pine Chemical Products Including Tall Oil and Other Related Products
- ASTM D4651-14(2020) Standard Specification for Isobutane Thermophysical Property Tables
- ASTM D4653-87(2020) Standard Test Method for Total Chlorides in Leather