
【国外标准】 Standard Practice for Standardizing Reverse Osmosis Performance Data
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
5.1 During the operation of an RO system, system conditions such as pressure, temperature, conversion, and feed concentration can vary, causing permeate flow and salt passage to change. To effectively evaluate system performance, it is necessary to compare permeate flow and salt passage data at the same conditions. Since data may not always be obtained at the same conditions, it is necessary to convert the RO data obtained at actual conditions to a set of selected constant conditions, thereby standardizing the data. This practice gives the procedure to standardize RO data.5.2 This practice can be used for both spiral wound and hollow fiber systems.5.3 This practice can be used for a single element or a multi-element system. However, if the RO system is brine staged, that is, the brine from one group of RO devices is the feed to a second group of RO devices, standardize the permeate flow and salt passage for each stage separately.5.4 This practice is applicable for RO systems with high rejections and with no significant leaks between the feed-brine and permeate streams.1.1 This practice covers the standardization of permeate flow, salt passage, and coefficient of performance data for reverse osmosis (RO) systems.1.2 This practice is applicable to waters including brackish waters and seawaters but is not necessarily applicable to waste waters.1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM D4516-19a
标准名称:
Standard Practice for Standardizing Reverse Osmosis Performance Data
英文名称:
Standard Practice for Standardizing Reverse Osmosis Performance Data标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM A732/A732M-20 Standard Specification for Castings, Investment, Carbon and Low-Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures
- ASTM A737/A737M-17 Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel
- ASTM A740-21 Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric)
- ASTM A743/A743M-21 Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application
- ASTM A745/A745M-20 Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings
- ASTM A746-18(2022) Standard Specification for Ductile Iron Gravity Sewer Pipe
- ASTM A748/A748M-87(2022) Standard Specification for Statically Cast Chilled White Iron-Gray Iron Dual Metal Rolls for Pressure Vessel Use
- ASTM A751-21 Standard Test Methods and Practices for Chemical Analysis of Steel Products
- ASTM A754/A754M-21 Standard Test Method for Coating Weight [Mass] of Metallic Coatings on Steel by X-Ray Fluorescence
- ASTM A756-17(2022) Standard Specification for Stainless Anti-Friction Bearing Steel
- ASTM A757/A757M-22 Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service
- ASTM A762/A762M-19 Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains
- ASTM A763-15(2021) Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels
- ASTM A765/A765M-07(2022) Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements
- ASTM A770/A770M-03(2018) Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications