购物车
400-168-0010
【国外标准】 Standard Specification for Balls, Bearings, Ferrous and Nonferrous for Use in Bearings, Valves, and Bearing Applications
本网站 发布时间：
2024-02-28
开通会员免费在线看70000余条国内标准，赠送文本下载次数，单本最低仅合13.3元！还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权！
查看详情>>
标准简介适用范围：
This specification covers requirements for ferrous and nonferrous inch balls. The balls are intended for use in bearings, bearing applications, check valves, and other components using balls. These balls are classified into fourteen kinds according to their chemical composition: Composition 1 (chrome alloy steel), Composition 2 (corrosion-resistance hardened steel), Composition 3 (carbon steel), Composition 4 (silicon molybdenum steel), Composition 5 (brass), Composition 6 (bronze), Composition 7 (aluminum bronze), Composition 8 (beryllium copper alloy), Composition 9 (nickel-copper alloy or Monel), Composition 10 (nickel-copper-aluminum alloy or K-Monel), Composition 11 (aluminum alloy), Composition 12 (tungsten carbide), Composition 13 (premium quality bearing steel or double vacuum melted M-50), and Composition 14 (corrosion resisting unhardened steel). Ball samples shall be subjected to a series of tests in order to determine the following properties: density, hardness, fracture grain size, porosity, surface roughness, decarburization, case depth, and passivation. Eddy current test, visual test, and dimensional test shall also be performed.1.1 This specification covers requirements for ferrous and nonferrous inch balls. The balls covered in this specification are intended for use in bearings, bearing applications, check valves, and other components using balls.1.2 This is a general specification. The individual item requirements shall be as specified herein in accordance with the MS sheet standards. In the event of any conflict between requirements of this specification and the MS sheet standards, the latter shall govern.1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.1.4 This specification contains many of the requirements of MIL-B-1083, which was originally developed by the Department of Defense and maintained by the Defense Supply Center Richmond.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.
标准号：
ASTM F2215-15
标准名称：
Standard Specification for Balls, Bearings, Ferrous and Nonferrous for Use in Bearings, Valves, and Bearing Applications
英文名称：
Standard Specification for Balls, Bearings, Ferrous and Nonferrous for Use in Bearings, Valves, and Bearing Applications标准状态：
Active-
发布日期：
-
实施日期：
出版语种：
- 推荐标准
- AS 1085.15-1995 Railway permanent way material Aluminothermic rail welding
- AS 1683.15.1-1990 Methods of test for elastomers - International rubber hardness
- AS 1684 Supp 15-1992 National Timber Framing Code - Timber framing span tables - Seasoned hardwood - Stress Grade F17 (Supplement to AS 1684-1992)
- AS 1684-1992 (Incl Supp 0,2,3,4,5,9,15) National Timber Framing Code
- AS 1684.2 N1/N2 Supp 15-2006 Residential timber-framed construction Non-cyclonic areas - N1/N2 Supplement 15: Timber framing span tables - Wind classification N1/N2 - Unseasoned hardwood - Stress Grade F17 (Supplement to AS 1684.2-2006)
- AS 1684.2 N1/N2 Supp 15-2010 Residential timber-framed construction Non-cyclonic areas - N1/N2 Supplement 15: Timber framing span tables - Wind classification N1/N2 - Unseasoned hardwood - Stress Grade F17 (Supplement to AS 1684.2-2010)
- AS 1684.2 N3 Supp 15-2006 Residential timber-framed construction Non-cyclonic areas - N3 Supplement 15: Timber framing span tables - Wind classification N3 - Unseasoned hardwood - Stress Grade F17 (Supplement to AS 1684.2-2006)
- AS 1684.2 N3 Supp 15-2010 Residential timber-framed construction Non-cyclonic areas - N3 Supplement 15: Timber framing span tables - Wind classification N3 - Unseasoned hardwood - Stress Grade F17 (Supplement to AS 1684.2-2010)
- AS 1684.2 N4 Supp 15-1999 Residential timber-framed construction Non-cyclonic areas - N4 Supplement 15: Timber framing span tables - Wind classification N4 - Unseasoned hardwood - Stress Grade F17 (Supplement to AS 1684.2-1999)
- AS 1684.3 C1 Supp 15-1999 Residential timber-framed construction Cyclonic areas - C1 Supplement 15: Timber framing span tables - Wind classification C1 - Unseasoned hardwood - Stress Grade F17 (Supplement to AS 1684.3-1999)
- AS 1684.3 C1 Supp 15-2006 Residential timber-framed construction Cyclonic areas - C1 Supplement 15: Timber framing span tables - Wind classification C1 - Unseasoned hardwood - Stress Grade F17 (Supplement to AS 1684.3-2006)
- AS 1684.3 C2 Supp 15-1999 Residential timber-framed construction Cyclonic areas - C2 Supplement 15: Timber framing span tables - Wind classification C2 - Unseasoned hardwood - Stress Grade F17 (Supplement to AS 1684.3-1999)
- AS 1684.3 C2 Supp 15-2006 Residential timber-framed construction Cyclonic areas - C2 Supplement 15: Timber framing span tables - Wind classification C2 - Unseasoned hardwood - Stress Grade F17 (Supplement to AS 1684.3-2006)
- AS 1684.3 C3 Supp 15-2010 Residential timber-framed construction Cyclonic areas - C3 Supplement 15: Timber framing span tables - Wind classification C3 - Unseasoned hardwood - Stress Grade F17 (Supplement to AS 1684.3-2010)
- AS 1735.15-1990 Lifts, escalators and moving walks Lifts for people with limited mobility - Restricted use - Non-automatically controlled
