
【国外标准】 Standard Test Methods for Penetration of Preservatives in Wood and for Differentiating Between Heartwood and Sapwood (Withdrawn 2008)
本网站 发布时间:
2024-02-28
- ASTM D3507-97(2000)
- Withdrawn, No replacement
- 定价: 0元 / 折扣价: 0 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
Preservatives of the metallic series and oil soluble preservatives are not readily apparent in a cross section of wood either due to similar color to the species of wood or lack of color of the preservative itself. Chemical staining of a treated specimen of wood reveals the presence of the preservative. The sapwood and heartwood of Douglas-Fir and the pine species can be differentiated by a chemical stain.1.1 These test methods cover procedures for determining penetration of preservatives in wood in cases where demarcation between the treated and untreated wood is not readily visible. Included are test methods for differentiating the heartwood and the sapwood of wood samples for specific species, and a test method for differentiating the heartwoods between the red oaks and the white oaks. 1.2 The procedures appear in the following order: Procedure Sections Penetration of Arsenic-Containing Preservatives 6 to 8 Penetration of Copper-Containing Preservatives 9 to 11 Penetration of Fluoride-Containing Preservatives 12 to 15 Penetration of Pentachlorophenol Using 4,4[prime]-bis-Dimethylamino-Triphenylmethane (DMTM) 16 to 20 Penetration of Pentachlorophenol Using a Silver-Copper Complex Known as "Penta-Check" 21 to 24 Penetration of Solvent Used With Oil-Soluble Preservatives 25 to 28 Penetration of Zinc-Containing Preservatives 29 to 32 Differentiating between Sapwood and Heartwood in Pine Species (Pinus sp.) 33 to 36 Differentiating between Sapwood and Heartwood in Douglas Fir (Pseudotsuga menziesii) 37 to 40 Differentiating between Sapwood and Heartwood in White Fir (Abies concolor) 41 to 44 Differentiating Between Woods of the Red Oak and the White Oak Species 45 to 48 1.3 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
标准号:
ASTM D3507-97(2000)
标准名称:
Standard Test Methods for Penetration of Preservatives in Wood and for Differentiating Between Heartwood and Sapwood (Withdrawn 2008)
英文名称:
Standard Test Methods for Penetration of Preservatives in Wood and for Differentiating Between Heartwood and Sapwood (Withdrawn 2008)标准状态:
Withdrawn, No replacement-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- AS/NZS 60335.2.97:2007/Amdt 1:2009 Household and similar electrical appliances - Safety Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment (IEC 60335-2-97 Ed 2.2, IDT)
- AS/NZS 60928:2000 Auxiliaries for lamps - A.C. supplied electronic ballasts for tubular fluorescent lamps - General and safety requirements
- AS/NZS 60950:2000 Safety of information technology equipment (IEC 60950:1999, MOD)
- AS/NZS 61241.1.2:2000 Electrical apparatus for use in the presence of combustible dust Electrical apparatus protected by enclosures and surface temperature limitation - Selection, installation and maintenance
- AS/NZS 61558.1:2000/Amdt 6:2007 Safety of power transformers, power supply units and similar General requirements and tests
- AS/NZS 61558.1:2000/Amdt 7:2011 Safety of power transformers, power supply units and similar General requirements and tests (IEC 61558-1 Ed 1.1, MOD)
- AS/NZS 61779.5:2000 Electrical apparatus for the detection and measurement of flammable gases Performance requirements for group II apparatus indicating a volume fraction up to 100% gas
- AS/NZS 61779.6:2000/Amdt 1:2005 Electrical apparatus for the detection and measurement of flammable gases Guide for the selection, installation, use and maintenance of apparatus for the detection and measurement of flammable gases
- AS/NZS 7799.2:2000 (Previously known as 4444.2) Information security management Specification for information security management systems
- AS/NZS ISO 9000(Int):2000 Quality management systems - Fundamentals and vocabulary
- AS/NZS ISO 9004(Int):2000 Quality management systems - Guidelines for performance improvement
- AS/NZS ISO 9004:2000 Quality management systems - Guidelines for performance improvements
- AS/NZS ISO/IEC 17020:2000 General criteria for the operation of various types of bodies performing inspection
- ASTM 51026-23 Standard Practice for Using the Fricke Dosimetry System
- ASTM 52303-24 Standard Guide for Absorbed-Dose Mapping in Radiation Processing Facilities