
【国外标准】 Standard Specification for Nuclear Facility Transient Worker Records
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
4.1 The standardization of nuclear facility transient worker records will provide the individual transient worker with a greater assurance that the radiation doses that may be received are within regulatory limits.4.2 This specification establishes a fixed content for nuclear facility transient worker records. Standardizing the content of these records will facilitate interfacing with industry-wide record keeping systems, such as the Nuclear Energy Institute (NEI) Personnel Data System (PADS).4.3 The standardization of nuclear facility transient worker records will reduce the time required for in-processing of these workers.AbstractThis specification covers the required content and provides retention requirements for records needed for in-processing of nuclear facility transient workers. This specification is not intended to cover specific skills records (such as equipment operating licenses, ASME inspection qualifications, or welding certifications), nor does it reduce any regulatory requirement for records retention at a licensed nuclear facility. Rather, the records shall contain data elements for the following information: worker identification; occupational external radiation exposure; occupational internal radiation exposure; lifetime occupational radiation exposure history; security screening; medical approval; and radiation worker training.1.1 This specification covers the required content and provides retention requirements for records needed for in-processing of nuclear facility transient workers.1.2 This specification applies to records to be used for in-processing only.1.3 This specification is not intended to cover specific skills records (such as equipment operating licenses, ASME inspection qualifications, or welding certifications).1.4 This specification doesPresident Barack Obama eulogy at John Lewis funeral not reduce any regulatory requirement for records retention at a licensed nuclear facility.NOTE 1: Nuclear facilities operated by the U.S. Department of Energy (DOE) are not licensed by the U.S. Nuclear Regulatory Commission (NRC), nor are other nuclear facilities that may come under the control of the U.S. Department of Defense (DOD) or individual agreement states. The references in this specification to licensee, the U.S. NRC Regulatory Guides, and Title 10 of the U.S. Code of Federal Regulations are to imply appropriate alternative nomenclature with respect to DOE, DOD, or agreement state nuclear facilities. This distinction does not alter the required content of records needed for in-processing of nuclear facility transient workers.NOTE 2: This specification does not define the form of the required worker records (such as a passport or central computerized record keeping system).1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM E1034-95(2020)
标准名称:
Standard Specification for Nuclear Facility Transient Worker Records
英文名称:
Standard Specification for Nuclear Facility Transient Worker Records标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 其它标准
- 上一篇: ASTM E1033-13 Standard Practice for Electromagnetic (Eddy Current) Examination of Type F-Continuously Welded (CW) Ferromagnetic Pipe and Tubing Above the Curie Temperature (Withdrawn 2019)
- 下一篇: ASTM E1035-18(2023) Standard Practice for Determining Neutron Exposures for Nuclear Reactor Vessel Support Structures
- 推荐标准
- ASTM F3275-22 Standard Guide for Using a Force Tester to Evaluate Performance of a Brush Part Designed to Clean the Internal Channel of a Medical Device
- ASTM F3276-22 Standard Guide for Using a Force Tester to Evaluate the Performance of a Brush Part Designed to Clean the External Surface of a Medical Device
- ASTM F3277-19 Standard Specification for Cantilevered Steel Bunks Used in Detention and Correctional Facilities
- ASTM F3283/F3283M-18 Standard Specification for the Manufacturing of High-Voltage Proximity Alarm to be used for the Detection of Overhead High Voltage Alternating Current (AC)
- ASTM F3288/F3288M-20 Standard Specification for MRS-Rated Metric- and Inch-sized Crosslinked Polyethylene (PEX) Pressure Pipe
- ASTM F3292-19 Standard Practice for Inspection of Spinal Implants Undergoing Testing
- ASTM F3293-18 Standard Guide for Application of Test Soils for the Validation of Cleaning Methods for Reusable Medical Devices
- ASTM F3294-18 Standard Guide for Performing Quantitative Fluorescence Intensity Measurements in Cell-based Assays with Widefield Epifluorescence Microscopy
- ASTM F3295-18 Standard Guide for Impingement Testing of Total Disc Prostheses
- ASTM F330-21 Standard Test Method for Bird Impact Testing of Aerospace Transparent Enclosures
- ASTM F3300-23 Standard Test Method for Abrasion Resistance of Flexible Packaging Films Using a Reciprocating Weighted Stylus
- ASTM F3301-18a Standard for Additive Manufacturing – Post Processing Methods – Standard Specification for Thermal Post-Processing Metal Parts Made Via Powder Bed Fusion
- ASTM F3302-18 Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Titanium Alloys via Powder Bed Fusion
- ASTM F3306-19 Standard Test Method for Ion Release Evaluation of Medical Implants
- ASTM F3308/F3308M-19(2023) Standard Practice for Sampling and Testing Frequency for Recycled Materials in Polyethylene (PE) Pipe for Non-Pressure Applications