
【国外标准】 Standard Guide for Ice Staff Self-Rescue Technique
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
3.1 This guide establishes a recommended procedure for utilizing an ice staff as a self-rescue technique on ice.3.2 All persons who are identified as ice rescuers shall meet the requirements of this guide.3.3 This guide will assist government agencies; state, local, or regional organizations; fire departments; rescue teams; and others who are responsible for establishing a minimum performance for personnel who respond to ice emergencies.3.4 This guide is not intended to be used in isolation, but as a component guide acknowledging many skills and techniques needed to respond at a cold water and ice emergency.3.5 An ice rescuer shall be wearing an immersion suit, drysuit with PFD, or equivalent cold water protection and buoyancy to perform these rescues.3.6 An ice rescuer shall carry a set of ice awls along with the ice staff as a backup technique.1.1 This guide describes the self-rescue technique on ice utilizing an ice staff.1.2 This guide is one in a series of self-rescue techniques for the ice rescuer.1.3 Individuals who will operate in the cold water or ice rescue setting need to be aware of the equipment and physical requirements necessary to be able to perform all identified objectives and necessary skills in the setting.1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM F1765-97a(2022)
标准名称:
Standard Guide for Ice Staff Self-Rescue Technique
英文名称:
Standard Guide for Ice Staff Self-Rescue Technique标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM B1-13(2018) Standard Specification for Hard-Drawn Copper Wire
- ASTM B100-20 Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use
- ASTM B1002-16(2020) Standard Specification for Refined Indium
- ASTM B1003-16(2023) Standard Specification for Seamless Copper Tube for Linesets
- ASTM B1004-16(2022) Standard Practice for Contact Performance Classification of Electrical Connection Systems
- ASTM B1005-17(2023) Standard Specification for Copper-Clad Aluminum Bar for Electrical Purposes (Bus Bar)
- ASTM B1008-18 Standard Test Method for Stress-Strain Testing for Overhead Electrical Conductors
- ASTM B1010/B1010M-19 Standard Specification for Copper-Clad Steel Electrical Conductor for Tracer Wire Applications
- ASTM B1011/B1011M-22 Standard Specification for Cobalt Alloy Spring Wire
- ASTM B1013-22 Standard Specification for High Fluidity (HF) Zinc-Aluminum Alloy Thin Wall Die Castings
- ASTM B1014-20 Standard Specification for Welded Copper and Copper Alloy Condenser and Heat Exchanger Tubes with a Textured Surface(s)
- ASTM B1019-21 Standard Test Method for Determination of Surface Oxides on Copper Rod(for Electrical Purposes)
- ASTM B1020/B1020M-22 Standard Specification for Seamless Nickel Alloy Mechanical Tubing and Hollow Bar
- ASTM B1021-21 Standard Test Method for Peel Resistance of Metal Sheets Joined by High Strength Bonds
- ASTM B1022-22 Standard Specification for Zinc-Aluminum-Magnesium Alloys in Ingot Form for Coating Steel Sheet by the Hot-Dip Process