
【国外标准】 Information Systems v One- and Two-sided, Unformatted, 90-mm (3.5-in), 5.3-tpmm (135-tpi) Flexible Disk Cartridge for 7958 BPR Use v General, Physical, and Magnetic Requirements (formerly ANSI X3.137:1988/AM1-1999)
本网站 发布时间:
2023-07-12
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
The revision contains substantive and editorial changes to ANSI X3.137:1988. The standard specifies the general, physical and magnetic requirements for inter-changeability of the one-and two-sided 90mm (3.5 in) (nominal) flexible disk cartridge (for 7958 bits-per-radian (bpr) use) as required to achieve unformatted disk cartridge interchange among disk drives using 80 tracks per side and associated information processing systems.
标准号:
INCITS 137-1988/AM 1-1999[S2012]
标准名称:
Information Systems v One- and Two-sided, Unformatted, 90-mm (3.5-in), 5.3-tpmm (135-tpi) Flexible Disk Cartridge for 7958 BPR Use v General, Physical, and Magnetic Requirements (formerly ANSI X3.137:1988/AM1-1999)
英文名称:
Information Systems v One- and Two-sided, Unformatted, 90-mm (3.5-in), 5.3-tpmm (135-tpi) Flexible Disk Cartridge for 7958 BPR Use v General, Physical, and Magnetic Requirements (formerly ANSI X3.137:1988/AM1-1999)标准状态:
现行-
发布日期:
-
实施日期:
出版语种:
- 其它标准
- 上一篇: INCITS 136-1986 (S2017) Serial Recorded Magnetic Tape Cartridge for Information Interchange, Four and Nine Track, 0.250 Inch (6.30 mm), 8000 bpi (315 bpmm), Streaming Mode, Group Code Recording
- 下一篇: INCITS 137-1988[S2008] Information Systems v One- and Two-sided, Unformatted, 90-mm (3.5-in), 5.3-tpmm (135-tpi) Flexible Disk Cartridge for 7958 BPR Use v General, Physical, and Magnetic Requirements (formerly ANSI X3.137:1988/AM1-1999)
- 推荐标准
- ASTM D1146-00(2018)e1 Standard Test Method for Blocking Point of Potentially Adhesive Layers
- ASTM D1179-16(2021)e1 Standard Test Methods for Fluoride Ion in Water
- ASTM D1243-22e1 Standard Test Method for Dilute Solution Viscosity of Vinyl Chloride Polymers
- ASTM D1250-19e1 Standard Guide for the Use of the Joint API and ASTM Adjunct for Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products, and Lubricating Oils: API MPMS Chapter 11.1
- ASTM D1264-18e1 Standard Test Method for Determining the Water Washout Characteristics of Lubricating Greases
- ASTM D1292-15(2021)e1 Standard Test Method for Odor in Water
- ASTM D1304-99(2020)e1 Standard Test Methods for Adhesives Relative to Their Use as Electrical Insulation
- ASTM D1385-07(2018)e1 Standard Test Method for Hydrazine in Water
- ASTM D1498-14(2022)e1 Standard Test Method for Oxidation-Reduction Potential of Water
- ASTM D1631-10(2018)e1 Standard Test Method for Water in Phenol and Related Materials by the Iodine Reagent Method
- ASTM D1971-16(2021)e1 Standard Practices for Digestion of Water Samples for Determination of Metals by Flame Atomic Absorption, Graphite Furnace Atomic Absorption, Plasma Emission Spectroscopy, or Plasma Mass Spectrometry
- ASTM D2028/D2028M-15(2021)e1 Standard Specification for Cutback Asphalt (Rapid-Curing Type)
- ASTM D2163-23e1 Standard Test Method for Determination of Hydrocarbons in Liquefied Petroleum (LP) Gases and Propane/Propene Mixtures by Gas Chromatography
- ASTM D2255/D2255M-09(2020)e1 Standard Test Method for Grading Spun Yarns for Appearance
- ASTM D2320-98(2022)e1 Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)