
【国外标准】 Outdoor Power Equipment - Internal Combustion Engine-Powered Hand-Held Grass Trimmers and Brushcutters - Safety and Environmental Requirements
本网站 发布时间:
2024-04-10
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
The requirements of this Standard apply to: a) Internal combustion engine杙owered, hand-held, grass trimmers intended for use with flexible nonmetallic line, or other types of nonmetallic cutting attachments, and b) Internal combustion engine杙owered, hand-held, brushcutters intended for use with cutting blades and other cutting attachments. NOTE ?If a grass trimmer is marketed by the manufacturer as convertible to a brushcutter, then the converted unit shall comply with requirements for brushcutters and vice-versa. A convertible unit may be marketed as a grass trimmer or a brushcutter without including the devices required for conversion in the packaging, provided the operator manual clearly addresses the need to acquire and use the required conversion devices and the manufacturer makes such devices available as optional equipment.
标准号:
ANSI/OPEI B175.3-2019
标准名称:
Outdoor Power Equipment - Internal Combustion Engine-Powered Hand-Held Grass Trimmers and Brushcutters - Safety and Environmental Requirements
英文名称:
Outdoor Power Equipment - Internal Combustion Engine-Powered Hand-Held Grass Trimmers and Brushcutters - Safety and Environmental Requirements标准状态:
现行-
发布日期:
-
实施日期:
出版语种:
- 其它标准
- 上一篇: ANSI/OPEI B175.2-2012 (R2019) Outdoor Power Equipment - Internal Combustion Engine-Powered Handheld and Backpack Blowers and Blower-Vacuums - Safety Requirements and Performance Testing Procedures
- 下一篇: ANSI/OPEI B175.4-2018 (R2024) Outdoor Power Equipment - Portable, Handheld, Internal Combustion Engine-Powered Cut-Off Machines - Safety and Environmental Requirements
- 推荐标准
- ASTM A627-03(2019) Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities
- ASTM A640-97(2019) Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable
- ASTM A700-14(2019) Standard Guide for Packaging, Marking, and Loading Methods for Steel Products for Shipment
- ASTM A719/A719M-14(2019) Standard Test Method for Lamination Factor of Magnetic Materials
- ASTM A727/A727M-14(2019) Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness
- ASTM A810-01(2019) Standard Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh
- ASTM A918-06(2019) Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
- ASTM A937/A937M-12(2019) Standard Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces
- ASTM A949/A949M-01(2019) Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe
- ASTM B1-13(2018) Standard Specification for Hard-Drawn Copper Wire
- ASTM B100-20 Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use
- ASTM B1002-16(2020) Standard Specification for Refined Indium
- ASTM B1003-16(2023) Standard Specification for Seamless Copper Tube for Linesets
- ASTM B1004-16(2022) Standard Practice for Contact Performance Classification of Electrical Connection Systems
- ASTM B1005-17(2023) Standard Specification for Copper-Clad Aluminum Bar for Electrical Purposes (Bus Bar)