
【国外标准】 Information technology - Data interchange on 300 mm optical disk cartridges of type WORM (Write Once Read Many) using irreversible effects - Capacity: 30Gbytes per cartridge
本网站 发布时间:
2024-08-08
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
This International Standard specifies the characteristics of a 300 mm optical disk cartridge (ODC) of Type WORM (Write Once Read Many) using irreversible effects, with a capacity of 30 Gbytes. This WORM ODC's uses writing effects that are inherently irreversible. Written marks cannot be erased and attempted modifications of the written marks are detectable. This International Standard specifies the conditions for conformance testing and the Reference Drive; the environments in which the cartridges are to be operated and stored; the mechanical, physical and dimensional characteristics of the cartridge, so as to provide mechanical interchange ability between data processing systems; the format of the information on the disk, both pre-written and user-written, including the physical disposition of the tracks and sectors, the error correction codes, the modulation methods used; the characteristics of the prerecorded information on the disk; the recording characteristics of the disk, enabling processing systems to write data onto the disk; the minimum quality of user-written data on the disk, enabling data processing systems to read data from the disk. This International Standard provides for interchange between optical disk drives. Together with a standard for volume and file structure it provides for full data interchange between data processing systems.
标准号:
INCITS/ISO/IEC 20162:2001
标准名称:
Information technology - Data interchange on 300 mm optical disk cartridges of type WORM (Write Once Read Many) using irreversible effects - Capacity: 30Gbytes per cartridge
英文名称:
Information technology - Data interchange on 300 mm optical disk cartridges of type WORM (Write Once Read Many) using irreversible effects - Capacity: 30Gbytes per cartridge标准状态:
现行-
发布日期:
-
实施日期:
出版语种:
- 其它标准
- 上一篇: INCITS/ISO/IEC 20085-2:2020 (2023) IT Security techniques - Test tool requirements and test tool calibration methods for use in testing non-invasive attack mitigation techniques in cryptographic modules - Part 2: Test calibration methods and apparatus
- 下一篇: INCITS/ISO/IEC 2022:1994 (R2018) Information technology -- Character code structure and extension techniques
- 推荐标准
- ASTM ISO/ASTM51310-22 Standard Practice for Use of a Radiochromic Optical Waveguide Dosimetry System
- ASTM ISO/ASTM51539-23 Standard Guidance for Use of Radiation-Sensitive Indicators
- ASTM ISO/ASTM51607-13 Standard Practice for Use of the Alanine-EPR Dosimetry System
- ASTM ISO/ASTM51608-15(2022) Standard Practice for Dosimetry in an X-Ray (Bremsstrahlung) Facility for Radiation Processing at Energies between 50 keV and 7.5 MeV
- ASTM ISO/ASTM51631-20 Standard Practice for Use of Calorimetric Dosimetry Systems for Dose Measurements and Routine Dosimetry System Calibration in Electron Beams
- ASTM ISO/ASTM51650-13 Standard Practice for Use of a Cellulose Triacetate Dosimetry System
- ASTM ISO/ASTM51707-15 Standard Guide for Estimation of Measurement Uncertainty in Dosimetry for Radiation Processing
- ASTM ISO/ASTM51900-23 Standard Guidance for Dosimetry for Radiation Research
- ASTM ISO/ASTM51939-17(2022) Standard Practice for Blood Irradiation Dosimetry
- ASTM ISO/ASTM52628-20 Standard Practice for Dosimetry in Radiation Processing
- ASTM ISO/ASTM52701-13(2020) Standard Guide for Performance Characterization of Dosimeters and Dosimetry Systems for Use in Radiation Processing
- ASTM ISO/ASTM52903-1-20 Additive manufacturing — Material extrusion-based additive manufacturing of plastic materials — Part 1: Feedstock materials
- ASTM ISO/ASTM52907-19 Additive manufacturing — Feedstock materials — Methods to characterize metallic powders
- ASTM ISO/ASTM52910-18 Additive manufacturing — Design — Requirements, guidelines and recommendations
- ASTM ISO/ASTM52911-1-19 Additive manufacturing — Design — Part 1: Laser-based powder bed fusion of metals