
【国外标准】 Information Systems - Contact Start/Stop Metallic Film Storage Disk - 83,333 Flux Transitions Per Track, 130-mm (5.118-in) Outer Diameter and 40-mm (1.575-in) Inner Diameter
本网站 发布时间:
2024-08-08
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
Specifies the general, physical, and magnetic requirements for interchangeability for the two-sided, 5.25-in (130-mm) flexible disk cartridge (for 13262 flux transitions per radian use) as required to achieve unformatted disk cartridge interchange among disk drives using 77 or 80 tracks per side and associated information processing systems.
标准号:
INCITS 163-1988 (S2017)
标准名称:
Information Systems - Contact Start/Stop Metallic Film Storage Disk - 83,333 Flux Transitions Per Track, 130-mm (5.118-in) Outer Diameter and 40-mm (1.575-in) Inner Diameter
英文名称:
Information Systems - Contact Start/Stop Metallic Film Storage Disk - 83,333 Flux Transitions Per Track, 130-mm (5.118-in) Outer Diameter and 40-mm (1.575-in) Inner Diameter标准状态:
现行-
发布日期:
-
实施日期:
出版语种:
- 其它标准
- 上一篇: INCITS 162-1988[S2009] Information Systems - Two-Sided, High-Density, Unformatted, 5.25-inch (130-mm), 96-tpi (3,8 tpmm), Flexible Disk Cartridge for 13 262 ftpr Use - General, Physical, and Magnetic Requirements [Includes Technical Corrigendum 1; ANSI INCITS 162-1988 (R2004)/TC-1-1995 (R2000)]
- 下一篇: INCITS 164-1990 (S2021) Unrecorded Magnetic Tape Cassette for Information Interchange 3.81 mm (0.150 In), 252 to 394 ftpmm (6400 to 10000 ftpi)
- 推荐标准
- AS/NZS 1660.2.1:1998 (R2017)/Amdt 1:2001 Test methods for electric cables, cords and conductors - Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods for general application
- AS/NZS 1660.2.4:1998 (R2017)/Amdt 1:2001 Test methods for electric cables, cords and conductors - Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to polyethylene and polypropylene materials
- AS/NZS 1660.2.5:1998 (R2017)/Amdt 1:2001 Test methods for electric cables, cords and conductors - Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to cables above 1 kV
- AS/NZS 3808:2000 (R2017)/Amdt 2:2004 Insulating and sheathing materials for electric cables
- AS/NZS 4488.1:1997 (R2017)/Amdt 1:1999 Industrial rope access systems - Specifications
- AS/NZS 5065:2005 (R2017)/Amdt 1:2010 Polyethylene and polypropylene pipes and fittings for drainage and sewerage applications
- ASTM A565/A565M-10(2017)e1 Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service
- ASTM A599/A599M-07(2017) Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet
- ASTM A713-04(2017) Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components
- ASTM A903/A903M-99(2017) Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection
- ASTM B116-95(2017) Standard Specification for Figure-9 Deep-Grooved and Figure-8 Copper Trolley Wire for Industrial Haulage
- ASTM B139/B139M-12(2017) Standard Specification for Phosphor Bronze Rod, Bar, and Shapes
- ASTM B163-22 Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes
- ASTM B47-95a(2017) Standard Specification for Copper Trolley Wire
- ASTM B470-02(2017) Standard Specification for Bonded Copper Conductors for Use in Hookup Wires for Electronic Equipment