- 您的位置:
- 快3网下载安装到手机 >>
- 全部标准分类 >>
- 国家标准 >>
- H60 >>
- GB/T 8013.1-2007e 铝及铝合金阳极氧化膜与有机聚合物膜 第1部分:阳极氧化膜

【国家标准】 铝及铝合金阳极氧化膜与有机聚合物膜 第1部分:阳极氧化膜
本网站 发布时间:
2019-08-27
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

文前页下载
适用范围:
1.1 This part specifies terms and definitions as well as performance requirements of significant surface,test methods and inspection rules of anodic oxide coatings on aluminium and its alloys.
1.2 It is applicable to the decorative and protective anodic oxide coatings on aluminium and its alloys.
1.3 It is not applicable to the specification of following coatings:
a) Non-porous anodic oxide coatings of the barrier layer type;
b) Anodic oxide coatings produced by chromic acid or phosphoric acid anodizing;
c) Anodic oxide coatings as the base film for the subsequent formation of organic coatings or metallic coatings;
d) Hard anodic oxide coatings used for engineering purposes.
1.2 It is applicable to the decorative and protective anodic oxide coatings on aluminium and its alloys.
1.3 It is not applicable to the specification of following coatings:
a) Non-porous anodic oxide coatings of the barrier layer type;
b) Anodic oxide coatings produced by chromic acid or phosphoric acid anodizing;
c) Anodic oxide coatings as the base film for the subsequent formation of organic coatings or metallic coatings;
d) Hard anodic oxide coatings used for engineering purposes.
标准号:
GB/T 8013.1-2007e
标准名称:
铝及铝合金阳极氧化膜与有机聚合物膜 第1部分:阳极氧化膜
英文名称:
Anodic oxide coatings and organic polymer coatings on aluminium and its alloys Part 1:Anodic oxide coatings标准状态:
被代替-
发布日期:
2007-04-30 -
实施日期:
2007-11-01 出版语种:
英文
起草人:
ZhuZufang,ChenSumei,DaiYuexing,ChenWensi,FengDongsheng,ZhuYuhua,GeLixin,ZhangZhongxing,ZhuYaohui,LiYongfeng,XuJie起草单位:
National Quality Supervision and Inspection Center for Nonferrous Metals;Fujian Minfa Aluminum Industry Co.,Ltd;Guangdong Jianmei Aluminum Profile Factory Co.,Ltd;Guangdong Xingfa Aluminum Co.,Ltd and Fujian Nanping Aluminum Co.,Ltd归口单位:
National Nonferrous Metals Standardization Technology Committee提出部门:
China Non-ferrous Metals Industry Association发布部门:
General Administration of Quality Supervision,Inspection and Quarantine of the People's Republic of China and Standardization Administration of the People's Republic of China
- 推荐标准
- GB/T 16474-2011 变形铝及铝合金牌号表示方法
- GB/T 22660.1-2008 氟化锂化学分析方法 第1部分:试样的制备和贮存
- GB/T 22660.2-2008 氟化锂化学分析方法 第2部分:湿存水含量的测定 重量法
- GB/T 22660.3-2008 氟化锂化学分析方法 第3部分:氟含量的测定 蒸馏-硝酸钍容量法
- GB/T 22660.4-2008 氟化锂化学分析方法 第4部分:镁含量的测定 火焰原子吸收光谱法
- GB/T 22660.5-2008 氟化锂化学分析方法 第5部分:钙含量的测定 火焰原子吸收光谱法
- GB/T 22660.7-2008 氟化锂化学分析方法 第7部分:三氧化二铁含量的测定 邻二氮杂菲分光光度法
- GB/T 22660.8-2008 氟化锂化学分析方法 第8部分:硫酸根含量的测定 硫酸钡重量法
- GB/T 41702-2022 原位生成纳米颗粒增强6000系铝基复合材料挤压材
- GB/T 5153-2016 变形镁及镁合金牌号和化学成分
- GB/T 5153-2016e 变形镁及镁合金牌号和化学成分
- GB/T 8005.1-2019 铝及铝合金术语 第1部分:产品及加工处理工艺
- GB/T 8005.4-2022 铝及铝合金术语 第4部分:回收铝
- GB/T 8013.3-2018 铝及铝合金阳极氧化膜与有机聚合物膜 第3部分:有机聚合物涂膜
- GB/T 29502-2021 硫铁矿烧渣