
【国外标准】 Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
This specification deals with the metric standard for three types of external sealing bands to be used in conjunction with concrete pipe, manholes, and precast box sections. The first type of bands shall be composed of rubber, mastic, and protective film elements, while the second type shall consist of a plastic film, reinforced, rubberized, asphalt, mastic coating with steel straps. The third type shall be composed of a backing band, an applied continuous butyl adhesive coating and an optional release element. All the elements of each type of sealing band shall have physical properties conforming with specified limits as determined through appropriate test methods herein provided.1.1 This specification covers external sealing bands to be used in conjunction with concrete pipe as defined in Terminology C822 and conforming to Specifications C14, C76, C412, C478/C478M, C506, C507, C655, C985, C1417, and C1433.1.1.1 Type I, Rubber and Mastic Bands.1.1.2 Type II, Plastic Film and Mesh Reinforced Mastic Bands.1.1.3 Type III, Chemically-Bonded Adhesive Butyl Bands.1.2 This specification is the inch-pound companion to Specification C877M; therefore, no SI equivalents are presented in the specification.NOTE 1: This specification covers only the design and material of the sealing bands. Sealing bands covered by this specification are adequate, when properly installed, for external hydrostatic pressures up to 13 psi, (30 ft) without leakage. The amount of infiltration or exfiltration flow in an installed pipeline is dependent upon many factors other than the sealing bands; allowable quantities and suitable testing of the installed pipeline and system must be covered by other specifications.1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM C877-21
标准名称:
Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections
英文名称:
Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM D817-12(2019) Standard Test Methods of Testing Cellulose Acetate Propionate and Cellulose Acetate Butyrate
- ASTM D8170-20 Standard Guide for Using Disposable Handheld Soil Core Samplers for the Collection and Storage of Soil for Volatile Organic Analysis
- ASTM D8171-18 Standard Test Methods for Density Determination of Flax Fiber
- ASTM D8174-18 Standard Test Method for Finite Flash Point Determination of Liquid Wastes by Small-Scale Closed Cup Tester
- ASTM D8176-18(2023) Standard Test Method for Mechanically Tapped Density of Activated Carbon (Powdered and Fine Mesh)
- ASTM D8180-23 Standard Specification for Rerefined Mineral Insulating Liquid Used in Electrical Apparatus
- ASTM D8181-19 Standard Specification for Microemulsion Blendstock for Preparing Microemulsion Test Fuel Oils
- ASTM D8186-18 Standard Test Method for Measurement of Impurities in Graphite by Electrothermal Vaporization Inductively Coupled Plasma Optical Emission Spectrometry (ETV-ICP OES)
- ASTM D8188-23 Standard Test Method for Determination of Density and Relative Density of Asphalt, Semi-Solid Bituminous Materials, and Soft-Tar Pitch by Use of a Digital Density Meter (U-Tube)
- ASTM D8192-23 Standard Test Method for Hardness in Colored and Colorless Water
- ASTM D8195-18 Standard Classification System and Basis for Specification for Polyethylene Terephthalate Film and Sheeting
- ASTM D8198-18 Standard Specification for Hydraulically Applied 100 % Wood Fiber Mulches
- ASTM D8199-20 Standard Test Method for Determining the Specific Strength of Hydraulically Applied Fiber Matrix Products for Erosion Control
- ASTM D820-93(2023) Standard Test Methods for Chemical Analysis of Soaps Containing Synthetic Detergents
- ASTM D8200-22 Standard Practice for Creating a Correlation to Compare Particle Size Distribution Results of Proppants by Dynamic Imaging Analyzers and Sieves