
【国外标准】 Standard Consumer Safety Specification for Bunk Beds
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
1.1 This consumer safety specification establishes minimum requirements for the design and performance of bunk beds. It also contains requirements for labeling and instructional material.1.2 This consumer safety specification is intended to minimize accidents to children resulting from normal use and reasonably foreseeable misuse or abuse of bunk beds. This consumer safety specification is written within the current state of the art of bunk bed technology and does not address bunk beds that are blatantly misused or are used in a careless manner that disregards warning statements and safety instructions provided with each bunk bed.1.3 For the purpose of this consumer safety specification, a bunk bed (hereinafter referred to as a bed) is defined as any structure that includes at least one sleeping surface in which the underside of any of its foundations is over 30 in. (762 mm) from the floor.1.4 This consumer safety specification does not address bunk beds for institutional use (for example, in prisons, military facilities, dormitories, and so forth).1.5 The values stated in inch-pound units, as well as any specified ISO/ANSI standard hardware, are to be regarded as the standard. The values given in parentheses are for information only.1.6 The following safety hazards caveat pertains only to the test methods portion, Section 5, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM F1427-21e1
标准名称:
Standard Consumer Safety Specification for Bunk Beds
英文名称:
Standard Consumer Safety Specification for Bunk Beds标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- AS/NZS 2243.3:1995/Amdt 1:1996 Safety in laboratories - Microbiology
- AS/NZS 2243.3:2002/Amdt 1:2003 Safety in laboratories Microbiological aspects and containment facilities
- AS/NZS 2270:2006 (R2016)/Amdt 1:2007 Plywood and blockboard for interior use
- AS/NZS 2271:2004 (R2016)/Amdt 1:2006 Plywood and blockboard for exterior use
- AS/NZS 2280:1999/Amdt 1:2003 Ductile iron pressure pipes and fittings
- AS/NZS 2299.1 Supp 1:2007 Occupational diving operations Standard operational practice Supplement 1: AS/NZS 2299 diving medical examination forms (Supplement to AS/NZS 2299.1:2007)
- AS/NZS 2344:1997/Amdt 1:2007 Limits of electromagnetic interference from overhead a.c. powerlines and high voltage equipment installations in the frequency range 0.15 to 1000 MHz
- AS/NZS 2350.16:2006 (R2016)/Amdt 1:2008 Methods of testing portland, blended and masonry cements Determination of air content of masonry cement
- AS/NZS 2350.3:2006 (R2016)/Amdt 1:2008 Methods of testing portland, blended and masonry cements Normal consistency
- AS/NZS 2350.4:2006 (R2016)/Amdt 1:2008 Methods of testing portland, blended and masonry cements Setting time
- AS/NZS 2416.2:2010/Amdt 1:2011 Water safety signs and beach safety flags Specifications for beach safety flags - Colour, shape, meaning and performance
- AS/NZS 2416.3:2010/Amdt 1:2011 Water safety signs and beach safety flags Guidance for use
- AS/NZS 2430.3.2:1997/Amdt 1:1999 Classification of harzardous areas - Examples of area classification-Vehicle workshops, vehicle parking, fuel dispensing stations and aricraft hangars
- AS/NZS 2430.3.9:1997/Amdt 1:1998 Classification of hazardous areas - Examples of area classification - Miscellaneous
- AS/NZS 2442.2:2000 (R2016)/Amdt 1:2006 Performance of household electrical appliances - Rotary clothes dryers Energy labelling requirements