
【国外标准】 Automatic Electrical Controls for Household and Similar Use - Part 2-8: Particular Requirements for Electrically Operated Water Valves, Including Mechanical Requirements (Adopted CEI/IEC 60730-2-8:2000, second edition, 2000-02)
本网站 发布时间:
- CAN/CSA-E60730-2-8-01
- 现行
- 定价: 1138元 / 折扣价: 968 元
- 在线阅读

适用范围:
1. Scope
This clause of part 1 is replaced as follows:
Replacement:
1.1 This part 2-8 applies to electrically operated water valves for
use in, on or in association with equipment for household and similar use that may use electricity, gas, oil,
标准号:
CAN/CSA-E60730-2-8-01
标准名称:
Automatic Electrical Controls for Household and Similar Use - Part 2-8: Particular Requirements for Electrically Operated Water Valves, Including Mechanical Requirements (Adopted CEI/IEC 60730-2-8:2000, second edition, 2000-02)
英文名称:
Automatic Electrical Controls for Household and Similar Use - Part 2-8: Particular Requirements for Electrically Operated Water Valves, Including Mechanical Requirements (Adopted CEI/IEC 60730-2-8:2000, second edition, 2000-02)标准状态:
现行-
发布日期:
-
实施日期:
出版语种:
英文
- 推荐标准
- ASTM D632-12(2020)e1 Standard Specification for Sodium Chloride
- ASTM D6358-19e1 Standard Classification System and Basis for Specification for Poly (Phenylene Sulfide) (PPS) Injection Molding, Extrusion and Blow Molding Materials Using ISO Methods
- ASTM D6379-21e1 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection
- ASTM D6416/D6416M-16e1 Standard Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load
- ASTM D6514-03(2019)e1 Standard Test Method for High Temperature Universal Oxidation Test for Turbine Oils
- ASTM D6515-00(2023)e1 Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
- ASTM D6557-18e1 Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils
- ASTM D6570-18a(2023)e1 Standard Practice for Assigning Allowable Properties for Mechanically Graded Lumber
- ASTM D6602-13(2022)e1 Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both
- ASTM D664-18e2 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
- ASTM D6643-01(2023) Standard Test Method for Testing Wood-Base Panel Corner Impact Resistance
- ASTM D6686-01(2019) Standard Test Method for Evaluation of Tannin Stain Resistance of Coatings
- ASTM D6706-01(2021) Standard Test Method for Measuring Geosynthetic Pullout Resistance in Soil
- ASTM D6794-20e1 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long (6 h) Heating Time
- ASTM D6796-21e1 Standard Practice for Production of Coal, Coke and Coal Combustion Samples for Interlaboratory Studies