
【国外标准】 Standard Guide for Categories and Terminology of Cellular and/or Tissue-Based Products (CTPs) for Skin Wounds
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
4.1 This guide provides definitions and a classification for CTPs, as well as definitions related to skin tissue, skin wounds and ulcers, wound healing physiology, wound covers, and related medical and surgical procedures. This guide is not intended to prescribe or limit the clinical uses of these products.4.2 One objective of the current guide is to include the wide range of CTPs for which there is a rationale for benefit beyond that achievable with conventional wound coverings. Whether an individual CTP is capable of promoting wound healing must be determined by adequate evidence and is beyond the scope of this standard. Given that some of the materials used in dressings and skin substitutes (defined in Guide F2311) are the same as those used in CTPs, there has been confusion as to how to classify these products.4.3 This guide is distinguished from Guide F2311, which defines terminology and provides classification by clinical use for products that can be substituted for tissue grafts of human or animal tissue in medical and surgical therapies of skin lesions. In contrast, this guide defines terminology for description of CTPs for skin wounds; CTPs are defined primarily by their composition. Neither guide establishes a correspondence between device structure and clinical function.1.1 This guide defines terminology for description of cellular and/or tissue-based products (CTPs) for skin wounds. CTPs are TEMPs (tissue-engineered medical products) that are primarily defined by their composition and comprise viable and/or nonviable human or animal cells, viable and/or nonviable tissues, and may include extracellular matrix components. CTPs may additionally include synthetic components.1.2 This guide also describes categories and terminology for CTPs based on their composition. This systematic categorization is not intended to be prescriptive for product labeling, and it describes only the most salient characteristics of these products; the actual biological and clinical functions can depend on characteristics not recognized in the categorization and it should be understood that two products that can be described identically by the categorization should not be presumed to be identical or have the same clinical utility.1.3 This guide defines CTP-related terminology in the context of skin wounds. However, this guide does not provide a correspondence between the CTP composition and its clinical use(s). More than one product may be suitable for each clinical use, and one product may have more than one clinical use.1.4 This guide does not purport to address safety concerns with the use of CTPs. It is the responsibility of the user of this standard to establish appropriate safety and health practices involved in the development of said products in accordance with applicable regulatory guidance documents and in implementing this guide to evaluate the cellular and/or tissue-based products for wounds.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM F3163-22
标准名称:
Standard Guide for Categories and Terminology of Cellular and/or Tissue-Based Products (CTPs) for Skin Wounds
英文名称:
Standard Guide for Categories and Terminology of Cellular and/or Tissue-Based Products (CTPs) for Skin Wounds标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM D4611-16 Standard Test Method for Specific Heat of Rock and Soil
- ASTM D4614-11(2019) Standard Specification for Ethyl Acetate (All Grades)
- ASTM D4616-23 Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch
- ASTM D4618-92(2017) Standard Specification for Design and Fabrication of Flue Gas Desulfurization System Components for Protective Lining Application
- ASTM D4619-12(2018) Standard Practice for Inspection of Linings in Operating Flue Gas Desulfurization Systems
- ASTM D4623-16 Standard Test Method for Determination of In Situ Stress in Rock Mass by Overcoring Method—Three Component Borehole Deformation Gauge
- ASTM D4625-21 Standard Test Method for Middle Distillate Fuel Storage Stability at 43 °C (110 °F)
- ASTM D4626-23 Standard Practice for Calculation of Gas Chromatographic Response Factors
- ASTM D4630-19 Standard Test Method for Determining Transmissivity and Storage Coefficient of Low-Permeability Rocks by In Situ Measurements Using the Constant Head Injection Test
- ASTM D4631-18 Standard Test Method for Determining Transmissivity and Storativity of Low Permeability Rocks by In Situ Measurements Using Pressure Pulse Technique
- ASTM D4634-16(2022) Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA)
- ASTM D4636-17 Standard Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils
- ASTM D4637/D4637M-15(2021)e1 Standard Specification for EPDM Sheet Used in Single-Ply Roof Membrane
- ASTM D4638-16(2023) Standard Guide for Preparation of Biological Samples for Inorganic Chemical Analysis
- ASTM D464-15(2020) Standard Test Methods for Saponification Number of Pine Chemical Products Including Tall Oil and Other Related Products