【国外标准】 Standard Guide for Development of Specifications for Fiber Reinforced Silicon Carbide-Silicon Carbide Composite Structures for Nuclear Applications

4.1 Composite materials consist by definition of a reinforcement phase in a matrix phase. In addition, ceramic matrix composites (CMCs) often contain measurable porosity which interacts with the reinforcement and matrix. And SiC-SiC composites often use a fiber interface coating which has an important mechanical function. The composition and structure of these different constituents in the CMC are commonly tailored for a specific application with detailed performance requirements. The tailoring involves the selection of the reinforcement fibers (composition, properties, morphology, etc.), the matrix (composition, properties, and morphology), the composite structure (component fractions, reinforcement architecture, interface coatings, porosity structure, microstructure, etc.), and the fabrication conditions (forming, assembly, forming, densification, finishing, etc.). The final engineering properties (physical, mechanical, thermal, electrical, etc.) can be tailored across a broad range with major directional anisotropy in the properties.4.2 Specifications for specific CMC components covering materials, material processing, and fabrication procedures are developed to provide a basis for fabricating reproducible and reliable structures. Designer/users/producers have to write CMC specifications for specific applications with well-defined composition, structure, properties and processing requirements. But with the extensive breadth of selection in composition, structure, and properties in CMCs, it is virtually impossible to write a "generic" CMC specification applicable to any and all CMC applications that has the same type of structure and details of the commonly-used specifications for metal alloys. This guide is written to assist the designer/user/producer in developing a comprehensive and detailed material specification for a specific CMC application/component with a specific focus on nuclear applications.4.3 The purpose of this guide is to provide guidance on how to specify the constituents, the structure, the desired engineering properties (physical, chemical, mechanical, durability, etc), methods of testing, manufacturing process requirements, the quality assurance requirements, and traceability for SiC-SiC composites for nuclear reactor applications. The resulting specification may be used for the design, production, evaluation, and qualification of SiC-SiC composites for structures in nuclear reactors.4.4 The guide is applicable to SiC-SiC composites with flat plate, rectangular bar, round rod, and round tube geometries.4.5 This guide may also be applicable to the development of specifications for SiC-SiC composites used for other structural applications, discounting the nuclear-specific chemical purity and irradiation behavior requirements.1.1 This document is a guide to preparing material specifications for silicon carbide fiber/silicon carbide matrix (SiC-SiC) composite structures (flat plates, rectangular bars, round rods, and tubes) manufactured specifically for structural components and for fuel cladding in nuclear reactor core applications. The SiC-SiC composites consist of silicon carbide fibers in a silicon carbide matrix produced by liquid infiltration/pyrolysis and/or by chemical vapor infiltration.1.2 This guide provides direction and guidance for the development of a material specification for a specific SiC-SiC composite component or product for nuclear reactor applications. The guide considers composite constituents and structure, physical and chemical properties, mechanical properties, thermal properties, performance durability, methods of testing, materials and fabrication processing, and quality assurance. The SiC-SiC composite materials considered here would be suitable for nuclear reactor core applications where neutron irradiation-induced damage and dimensional changes are significant design considerations. (1-8)21.3 The component material specification is to be developed by the designer/purchaser/user. The designer/purchaser/user shall define and specify in detail any and all application-specific requirements for design, manufacturing, performance, and quality assurance of the ceramic composite component. Additional specification items for a specific component, beyond those listed in this guide, may be required based on intended use, such as geometric tolerances, permeability, bonding, sealing, attachment, and system integration.1.4 This guide is specifically focused on SiC-SiC composite components and structures with flat plate, solid rectangular bar, solid round rod, and tubular geometries.1.5 This guide may also be applicable to the development of specifications for SiC-SiC composites used for other structural applications, discounting the nuclear-specific chemical purity and irradiation behavior factors.1.6 Units—The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.