
【国外标准】 Standard Practice for Guinea Pig: Split Adjuvant and Closed Patch Testing for Contact Allergens
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
5.1 In selecting a material for human contact in medical applications, it is important to ensure that the material will not stimulate the immune system to produce an allergic reaction under relevant exposure conditions. Extractable chemicals produced by skin contact or during physiological exposures may cause allergic reactions. Therefore, this practice provides for evaluations of solid or semisolid dosage forms using material extracts or direct evaluation of the test article. The rationale for this animal model is based on the fact that the guinea pig has been shown to be an appropriate animal model for predicting human contact dermatitis. Its tractable nature, its availability from reputable suppliers, the historical database of information already acquired using this species, and the correlation of such results to data on known human allergens, all contribute to its widespread use for allergenicity studies (1-5).45.2 The need for sensitization procedures other than the maximization test (Practice F720) is based on: (1) the need for a route of exposure more similar to use conditions; (2) concern over the use of adjuvant because of its recruitment of cell types to the test site which are not typically involved in immunologic reactions, and because of the discomfort this causes in the animals; (3) absence of a proper FCA-irritant control group in the traditional maximization design; and (4) the frequency of false positives often encountered with the GPMT. Both of these tests are internationally accepted (1).AbstractThis practice is intended to determine the potential for a substance, or material extract, to elicit contact dermal allergenicity. It is intended as an alternative to the Guinea Pig Maximization Test (GPMT), given the limitations on dosage form and tendency for false positives associated with the latter test. The split adjuvant method is used when topical application is considered relevant, and the dosage form is a solid, liquid, extract, paste, or gel. The method includes four induction doses applied over a period of time to the same shaved or depilated site on guinea pigs, followed by occlusive patching. Freund's Complete Adjuvant (FCA) is injected near the dose site on a specific time, (second induction dose). Following a rest period, animals are challenged at a previously unexposed site, and the reaction evaluated at regular intervals. The closed patch method is used when topical application is relevant, but the preferred dosage form does not permit injection under the skin or intradermally, and the discomfort involved with extended occlusive patching and adjuvant use is to be avoided. It involves repeated induction doses over a period of time at the same shaved/depilated site, followed each time by occlusive wrapping. After a rest period, animals are challenged at previously untreated sites, and their reactions evaluated after a period of time.1.1 This practice is intended to determine the potential for a substance, or material extract, to elicit contact dermal allergenicity.1.2 This practice is intended as an alternative to the Guinea Pig Maximization Test (GPMT), given the limitations on dosage form and tendency for false positives associated with the latter test. See Rationale and References.1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
标准号:
ASTM F2147-01(2016)
标准名称:
Standard Practice for Guinea Pig: Split Adjuvant and Closed Patch Testing for Contact Allergens
英文名称:
Standard Practice for Guinea Pig: Split Adjuvant and Closed Patch Testing for Contact Allergens标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ANSI X9.112-2016 Wireless Management and Security - Part 1: General Requirements
- ANSI X9.121-2016 (R2021) Balance and Transaction Reporting Standard BTRS Version 3.1 (BTR3)
- AS 1050.12-1983 (R2016)/Amdt 1-1984 Methods for the analysis of iron and steel - Determination of nitrogen in steel (steam distillation titrimetric method)
- AS 1271-2003 (R2016)/Amdt 1-2004 Safety valves, other valves, liquid level gauges and other fittings for boilers and unfired pressure vessels
- AS 1288-2006 (R2016)/Amdt 2-2011 Glass in buildings - Selection and installation
- AS 1358-2004 (R2016)/Amdt 1-2007 Bursting discs and bursting disc devices - Application, selection and installation
- AS 1361-1995 (R2016)/Amdt 1-2005 Electric heat-exchange water heaters - For domestic applications
- AS 1418.3-1997 (R2016)/Amdt 2-2002 Cranes (including hoists and winches) Bridge, gantry and portal cranes (including container cranes)
- AS 1530.2-1993 (R2016)/Amdt 1-1993 Methods for fire tests on building materials, components and structures - Test for flammability of materials
- AS 1603.1-1997 (R2016)/Amdt 1-1998 Automatic fire detection and alarm systems - Heat detectors
- AS 1603.2-1997 (R2016)/Amdt 1-1998 Automatic fire detection and alarm systems - Point type smoke detectors
- AS 1603.5-1996 (R2016)/Amdt 1-1998 Automatic fire detection and alarm systems - Manual call points
- AS 1796-2001 (R2016)/Amdt 1-2002 Certification of welders and welding supervisors
- AS 1860.2-2006 (R2016)/Amdt 1-2010 Particleboard flooring Installation
- AS 1926.2-2007 (R2016)/Amdt 1-2008 Swimming pool safety Location of safety barriers for swimming pools