- 您的位置:
- 快3网下载安装到手机 >>
- 全部标准分类 >>
- 国外标准 >>
- ASTM >>
- ASTM D3558-15(2023) Standard Test Methods for Cobalt in Water

【国外标准】 Standard Test Methods for Cobalt in Water
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
4.1 Most waters rarely contain more than trace concentrations of cobalt from natural sources. Although trace amounts of cobalt seem to be essential to the nutrition of some animals, large amounts have pronounced toxic effects on both plant and animal life.1.1 These test methods cover the determination of dissolved and total recoverable cobalt in water and wastewater 2 by atomic absorption spectrophotometry. Three test methods are included as follows: Concentration Range SectionsTest Method A—Atomic Absorption, Direct 0.1 mg/L to 10 mg/L 7 to 16Test Method B—Atomic Absorption, Chelation-Extraction 10 μg/L to 1000 μg/L 17 to 26Test Method C—Atomic Absorption, Graphite Furnace 5 μg/L to 100 μg/L 27 to 361.2 Test Method A has been used successfully with reagent water, potable water, river water, and wastewater. Test Method B has been used successfully with reagent water, potable water, river water, sea water and brine. Test Method C was successfully evaluated in reagent water, artificial seawater, river water, tap water, and a synthetic brine. It is the analyst's responsibility to ensure the validity of these test methods for other matrices.1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not considered standard.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see 11.8.1, 21.12, and 23.10.1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM D3558-15(2023)
标准名称:
Standard Test Methods for Cobalt in Water
英文名称:
Standard Test Methods for Cobalt in Water标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- AS/NZS 3200.2.15:1994 Approval and test specification - Medical electrical equipment Particular requirements for safety - Capacitor discharge X-ray generators
- AS/NZS 3350.2.15:1997 Safety of household and similar electrical appliances Particular requirements - Appliances for heating liquids
- AS/NZS 3350.2.15:1997/Amdt 1:1997 Safety of household and similar electrical appliances - Particular requirements - Appliances for heating liquids
- AS/NZS 3350.2.15:1997/Amdt 3:2001 Safety of household and similar electrical appliances - Particular requirements - Appliances for heating liquids
- AS/NZS 3350.2.15:1997/Amdt 4:2001 Safety of household and similar electrical appliances - Particular requirements - Appliances for heating liquids
- AS/NZS 3350.2.15:2002/Amdt 1:2003 Safety of household and similar electrical appliances Particular requirements for appliances for heating liquids (IEC 60335-2-15:1995, MOD)
- AS/NZS 3350.2.15:2002/Amdt 2:2003 Safety of household and similar electrical appliances - Particular requirements for appliances for heating liquids (IEC 60335-2-15:1995, MOD)
- AS/NZS 3350.2.15:2002/Amdt 3:2007 Safety of household and similar electrical appliances Particular requirements for appliances for heating liquids (IEC 60335-2-15:1995)
- AS/NZS 3750.15:1998 (R2013) Paints for steel structures Inorganic zinc silicate paint
- AS/NZS 4456.15:1997 Masonry units and segmental pavers - Methods of test Determining lateral modulus of rupture
- AS/NZS 4456.15:2003/Amdt 1:2004 Masonry units, segmental pavers and flags - Methods of test Determining lateral modulus of rupture
- AS/NZS 4524.15:1998 Bonded abrasive products - Dimensions Grinding wheels for cutting-off on cutting-off machines or swing frame machines
- AS/NZS 60079.15:2011 Explosive atmospheres Equipment protection by type of protection ‘n’
- AS/NZS 60335.2.15:2002/Amdt 1:2003 Household and similar electrical appliances - Safety Particular requirements for appliances for heating liquids
- AS/NZS 60335.2.15:2002/Amdt 2:2003 Household and similar electrical appliances - Safety Particular requirements for appliances for heating liquids