
【国外标准】 Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
5.1 The measurement of particle-bound, oxidized, elemental, and total mercury in stationary-source flue gases provides data that can be used for emissions assessments and reporting, the certification of continuous mercury monitoring systems, regulatory compliance determinations and research programs associated with dispersion modeling, deposition evaluation, human health and environmental impact assessments. Particle-bound, oxidized, and elemental mercury measurements before and after control devices may be necessary for optimizing and evaluating the mercury removal efficiency of emission control technologies.5.2 This test method was developed for the measurement of mercury in coal-fired power plants and has been extensively validated for that application. With additional procedures given in this standard, it is also applicable to sources having a flue gas composition with high levels of hydrochloric acid, and low levels of sulfur dioxide.1.1 This test method applies to the determination of elemental, oxidized, particle-bound, and total mercury emissions from coal-fired stationary sources.1.2 This test method is applicable to elemental, oxidized, particle-bound, and total mercury concentrations ranging from approximately 0.5 to 100 μg/Nm3.1.3 This test method describes equipment and procedures for obtaining samples from effluent ducts and stacks, equipment and procedures for laboratory analysis, and procedures for calculating results.1.4 This test method is applicable for sampling elemental, oxidized, and particle-bound mercury in flue gases of coal-fired stationary sources. It may not be suitable at all measurement locations, particularly those with high particulate loadings, as explained in Section 16.1.5 Method applicability is limited to flue gas stream temperatures within the thermal stability range of the sampling probe and filter components.1.6 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only.1.7 This standard requires users to be familiar with EPA stack-gas sampling procedures as stated in EPA Methods 1–4, Method 5, and Method 17.1.8 The method requires a high level of experience and quality control both in the field testing and analytical procedures in order to obtain high quality data.1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
标准号:
ASTM D6784-16
标准名称:
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
英文名称:
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM F2947/F2947M-21a Standard Specification for 150 to 1500 mm [6 to 60 in.] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
- ASTM F2948-21 Standard Guide to Walkway Auditor Qualifications
- ASTM F2949-18 Standard Specification for Pole Vault Box Collars
- ASTM F2950-14(2021) Standard Safety and Performance Specification for Soccer Goals
- ASTM F2951-19 Standard Consumer Safety Specification for Baby Monitors
- ASTM F2952-22 Standard Guide for Determining the Mean Darcy Permeability Coefficient for a Porous Tissue Scaffold
- ASTM F2956-22 Standard Test Methods for Anchor Systems Used for Detention Hollow Metal Systems
- ASTM F2958-14(2019) Standard Guide for Helicopter Inland Search and Rescue (SAR) Technician
- ASTM F2970-22 Standard Practice for Design, Manufacture, Installation, Operation, Maintenance, Inspection and Major Modification of Trampoline Courts
- ASTM F2974-22 Standard Practice for Auditing Amusement Rides and Devices
- ASTM F2975-12(2022) Standard Test Method for Measuring the Field Performance of Commercial Kitchen Ventilation Systems
- ASTM F2977-20 Standard Test Method for Small Punch Testing of Polymeric Biomaterials Used in Surgical Implants
- ASTM F2981-15(2020) Standard Test Method for Verifying Nonporous Flexible Barrier Material Resistance to the Passage of Air
- ASTM F2983-13(2018) Standard Guide for Manufacturers for Labeling and Care Instructions for Wrestling Mats
- ASTM F2986-23 Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Leachate, Heap Leach Aeration and Other Mining Applications